ESL 2CDS251001R0427, EAN: 4016779496117

ESL 2CDS251001R0427 S201-K10 Fuse Switch 10A 1-pole

Installation > Modular devices / equipment installation > Circuit breaker

ESL 2CDS251001R0427 S201-K10 Fuse Switch 10A 1-pole

Lieske Part No. 730061
Mfg Part No 2CDS251001R0427
EAN-Code 4016779496117
Manufacturer ESL
Here only 38,09 EUR
45,33 EUR incl. VAT

Further information for ESL 2CDS251001R0427 S201-K10 Fuse Switch 10A 1-pole

General
Nominal current10 A
Degree of protectionIP20
Switching characteristicK
Connection cross section35 mm²
SystemCompact
Number of poles1 way
ApprovalsDIN VDE 0641-11, IEC/EN 60898-1, DIN VDE 0660-101, IEC/EN 60947-2, UL1077
StandardsDIN VDE 0100-430, DIN VDE 0100-530
The S201-K10 circuit breaker from ESL belongs to the S 200 series and is designed as a 1-pole circuit breaker for use in the Compact system. It provides protection for cables and lines against overload and short circuit in accordance with standards DIN VDE 0100-430 and DIN VDE 0100-530. The device complies with construction regulations DIN VDE 0641-11 as well as IEC/EN 60898-1, DIN VDE 0660-101 and IEC/EN 60947-2, and is also UL1077-certified, highlighting its suitability for worldwide use. The K-characteristic of the switch ensures balanced tripping behavior under transient loads, making it particularly suitable for applications with motor or inductive loads.

Applications

The S201-K10 is intended for use in electrical distribution systems within the field of building electrotechnics. It is mounted in enclosures and distribution boxes within the Compact system, where it functions as a protective switch for individual consumers or circuit sections. The K-characteristic makes it especially suitable for installations with frequent load peaks, such as those occurring with electric motors, pumps or heating appliances. Compliance with the mentioned standards ensures conformity with applicable safety and installation regulations in Germany and internationally.

Functions and equipment in detail

A central feature of the S201-K10 is the patented connection terminal, which enables simple and secure connection. The terminal is operated via a pressure plate, allowing wiring to be carried out quickly and without tools. The connection opening for cables is positioned above the connection opening for the phase bar, improving visibility and handling during wiring. Conductor cross-sections up to 35 mm² can be connected directly to the terminal, with insulation permitted up to protection class IP20. This allows direct connection without additional tools or accessories.

Technology explained simply

The switch operates on the principle of a thermal-magnetic circuit breaker. In case of overload, a bimetal strip is deflected by heat and triggers the tripping process. In the event of a short circuit, a magnetic actuator immediately separates the contacts. The K-characteristic means that the switch does not trip during short-term current surges up to approximately 10 times the rated current (100 A at 10 A rated current), but only at higher, sustained loads. This prevents unnecessary tripping under normal operating conditions. The protection class IP20 ensures that solid foreign objects with a diameter of at least 12.5 mm cannot enter, which is sufficient for use in enclosed enclosures.

Compatibility and accessories

The S201-K10 is designed for use in the Compact system and can be combined with various busbars. Suitable accessories include busbars such as PS3/60, PS3/9, PS3/12, and PS3/6, each intended for connecting multiple switches in the Compact system. Additionally, a three-phase set 710SPM with a cross-section of 10 mm² and a length of 1056 mm is available, suitable for connecting multiple phase conductors. These components enable flexible and modular installation in distribution enclosures.

Mounting and installation

Mounting is carried out in standard distribution boxes within the Compact system. The switch is inserted into the designated mounting opening and secured using a clamp strip or rail profile. Wiring is done via the connection terminal described above, with the cable connected directly. The positioning of the connection openings facilitates work, as the cable connections are located above the phase bar, providing better visibility during installation. No additional tools or accessories are required, as the pressure plate automatically locks the terminal.

Advantages in operation

The S201-K10 offers reliable protection with minimal maintenance effort. The patented connection terminal reduces installation time and minimizes error sources. The K-characteristic prevents unnecessary tripping under transient loads, increasing operational reliability. Compliance with international standards and approvals enables use in various markets without additional modifications. The triple quality inspection before shipment ensures high product quality and reliability in continuous operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/730061
qrcode für ESL 2CDS251001R0427 S201-K10 Fuse Switch 10A 1-pole