ESL 2CDS251001R0254, EAN: 4016779464604

ESL 2CDS251001R0254 Circuit Breaker 25A 1-pole C-Characteristic

Installation > Modular devices / equipment installation > Circuit breaker

ESL 2CDS251001R0254 Circuit Breaker 25A 1-pole C-Characteristic

Lieske Part No. 369950
Mfg Part No 2CDS251001R0254
EAN-Code 4016779464604
Manufacturer ESL
Here only 35,24 EUR
41,94 EUR incl. VAT

Further information for ESL 2CDS251001R0254 Circuit Breaker 25A 1-pole C-Characteristic

General
Nominal current25 A
Degree of protectionIP20
CharacteristicC
Number of poles1
SystemCompact
Max. conductor cross section35 mm²
ApprovalsDIN VDE 0100-430, DIN VDE 0100-530, DIN VDE 0641-11, IEC/EN 60898-1, DIN VDE 0660-101, IEC/EN 60947-2, UL1077
The S201-C25 circuit breaker from the S 200 series by ESL is a 1-pole circuit breaker with C-characteristic, designed for use in electrical installations. It protects cables and wiring against overload and short circuit in accordance with standards DIN VDE 0100-430 and DIN VDE 0100-530. The series complies with construction regulations DIN VDE 0641-11 as well as IEC/EN 60898-1, DIN VDE 0660-101, IEC/EN 60947-2 and UL1077, making it suitable for use in various applications worldwide. The device is intended for installation in System Compact and features a patented connection terminal that enables secure and easy connection. The connection terminal is operated via a pressure plate, simplifying handling. The cable entry opening is positioned above the phase bar entry opening, providing better visibility during wiring. Conductor cross-sections up to 35 mm² can be directly connected to the device, with the connection terminal featuring insulation in protection class IP20.

Applications

The S201-C25 is suitable for use in electrical distributions in residential and commercial buildings as well as in industrial installations. It protects electrical wiring against thermal overload and short-circuit currents, ensuring the safety of the installation. Compliance with the mentioned standards and construction regulations makes it suitable for use in Germany and internationally, particularly in installations that must meet the requirements of electrical regulations.

Functions and Equipment in Detail

The switch features a C-characteristic, which provides moderate tripping delay for short-term current surges, while reacting quickly to sustained overloads. The patented connection terminal enables a secure and reliable connection, with the pressure plate simplifying installation. The cable entry opening is positioned above the phase bar, improving wiring within the enclosure. The maximum conductor cross-section of 35 mm² allows direct connection without additional transition terminals. Protection class IP20 ensures that the connection area is protected against finger contact, enhancing safety during installation.

Technology Explained Simply

The C-characteristic means that the switch exhibits a certain delay in tripping for current values up to approximately 5 times the rated value (here 25 A), allowing it to tolerate short-term current surges, such as those occurring during motor start-up or other inductive loads. At higher current values indicating a short circuit, the switch trips quickly. Protection class IP20 means the device is protected against finger contact, but not against dust or splashing water. The connection terminal with pressure plate allows for quick and secure installation, while the terminal insulation enhances electrical safety.

Compatibility and Accessories

The S201-C25 is designed for installation in System Compact and can be combined with various busbars, including PS3/6, PS3/9 and PS3/12 System Compact. The PS3/60 busbar is available as a 3-phase bar for cutting, with a length of 1056 mm. Additionally, a three-phase set 710SPM with a cross-section of 10 mm² and a length of 1056 mm is available, suitable for connection with the Compact system. The end cap for the PS3/12 busbar is also included in the accessory range. These components enable flexible and modular installation in the enclosure.

Installation and Mounting

Installation is carried out in System Compact, with the connection terminal operated via the pressure plate. Cables are inserted directly into the connection opening, taking into account the maximum cross-section of 35 mm². The positioning of the cable entry opening above the phase bar facilitates wiring. Protection class IP20 requires that the connection area is not touched, which must be observed during installation. Compliance with standards and construction regulations ensures a safe and proper installation.

Operational Advantages

The S201-C25 provides reliable protection for electrical wiring and cables. The C-characteristic ensures an appropriate response to short-term current surges, while the rapid tripping during short-circuit currents enhances safety. The patented connection terminal with pressure plate simplifies installation and ensures a secure connection. Compatibility with System Compact and various busbars enables flexible and modular installation. Compliance with international standards and approvals makes the switch suitable for worldwide use. Each device undergoes three intensive quality and performance tests before delivery, underscoring the product's reliability.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/369950
qrcode für ESL 2CDS251001R0254 Circuit Breaker 25A 1-pole C-Characteristic