| General |
| Nominal current | 2 A |
| Number of poles | 1 way |
| Degree of protection | IP20 |
| Terminal clamp | patented pressure plate |
| Maximum conductor cross-section | 35 mm² |
| Standards | DIN VDE 0100-430, DIN VDE 0100-530, DIN VDE 0641-11, IEC/EN 60898-1, DIN VDE 0660-101, IEC/EN 60947-2, UL1077 |
The S201-C2 circuit breaker from ESL is a 1-pole circuit protection switch from the S 200 series, designed to protect cables and wiring against overload and short-circuit. It is intended for use in electrical installations and complies with relevant standards and building regulations, including DIN VDE 0100-430, DIN VDE 0100-530, DIN VDE 0641-11, IEC/EN 60898-1, DIN VDE 0660-101, IEC/EN 60947-2, and UL1077. These approvals ensure suitability for worldwide use in various application areas.
Applications
The S201-C2 is designed for use in low-voltage installations, particularly in residential and commercial buildings, where reliable protection of wiring is required. It protects electrical consumers and installations from damage caused by overcurrent or short-circuits. Compliance with the mentioned standards makes it suitable for use in Germany and other countries with corresponding regulations.
Functions and Features in Detail
The switch features a patented connection terminal that enables simple and secure connection. The connection is made via a pressure plate, ensuring a secure and durable connection. The cable entry opening is located above the phase bar entry opening, simplifying wiring and improving visibility. Conductor cross-sections up to 35 mm² can be directly connected to the device, with the terminal equipped with insulation in protection class IP20.
Technology Explained Simply
The protection function of the S201-C2 is based on thermal and magnetic tripping mechanisms, which automatically disconnect the circuit in case of overload or short-circuit. The thermal component responds to prolonged overloads, while the magnetic component trips quickly in response to sudden high currents, such as during short-circuits. The IP20 protection rating ensures protection against contact with fingers or similar objects, but not against dust or splashing water. This protection rating is suitable for indoor use.
Compatibility and Accessories
The S201-C2 is designed for use in the Compact system and can be combined with various busbars, including PS3/9, PS3/60, PS3/12, and PS3/6. These busbars enable flexible and modular installation. Additionally, a three-phase set 710SPM with a cross-section of 10 mm² and a length of 1056 mm is available, suitable for connection with the Compact system. The accessory range thus provides all necessary components for professional installation.
Mounting and Installation
Mounting is carried out in standard installation rails (DIN rails) for row mounting. The connection terminal allows for quick and secure wiring. The positioning of the connection openings supports clear and error-free wiring. The IP20 protection rating requires installation in enclosed, dry rooms, and installation must comply with applicable regulations.
Advantages in Operation
The S201-C2 offers reliable and precise protection, guaranteed by compliance with international standards and triple quality inspection before shipment. The patented connection terminal reduces installation time and increases safety. Compatibility with the Compact system and the extensive accessory range enables flexible and scalable installation. The IP20 protection rating and compliance with building regulations make the switch suitable for use in standardized electrical installations.