Erico 171850, EAN: 8711893718546

Erico 171850 CADDY EM912S Clamp Zinc 14-20 mm

Installation > Fixing hardware > Fasteners

Erico 171850 CADDY EM912S Clamp Zinc 14-20 mm

Lieske Part No. 331955
Mfg Part No 171850
EAN-Code 8711893718546
Manufacturer Erico
Here only 4,82 EUR
5,74 EUR incl. VAT

Further information for Erico 171850 CADDY EM912S Clamp Zinc 14-20 mm

General
Degree of protectionZinc coating
MaterialSpring steel
Mounting typeclamping
Threaded studM6 x 11 mm
Flange thickness14 to 20 mm
ApplicationEquipment boxes, devices, mounting on carrier flanges
ManufacturerErico
The Erico CADDY EM912S is a fastening element made of spring steel, specifically designed for mounting device enclosures, fittings, and other components onto carrier flanges. It serves as a mechanical connection, inserted into the flange by hammering and subsequently secured with a threaded stud. The clamp is designed for flange thicknesses of 14 to 20 mm and enables stable fastening in electrical and installation technology.

Fastening element
This product is a spring steel-based fastening element, fixed by hammering into the carrier flange. The springy construction ensures a secure anchoring, which remains stable even under slight vibrations or movements during operation. The clamp is hammered into the flange, pressing firmly into place and enabling a durable holding solution.

Applications
The EM912S is primarily used in electrical installations, where device enclosures, switch boxes, or other electrical components must be mounted onto metal flanges. The application is suitable for indoor and outdoor environments where a robust and durable fastening is required. The clamp is particularly suitable for installations in industrial environments or during the mounting of distributors and enclosures.

Functions and equipment in detail
The clamp is secured with an M6 x 11 mm threaded stud, which is screwed into the designated hole in the clamp. This threaded stud provides additional mechanical fixation and prevents the clamp from loosening under load. The spring steel construction ensures high load capacity and long service life under normal operating conditions.

Technology explained simply
Fastening is achieved by hammering the clamp into the flange, causing it to press firmly into the flange structure. The springy property of the material ensures that the clamp does not loosen even under minor movements in the flange. The use of an M6 threaded stud enables additional mechanical anchoring, increasing stability. The clamp is designed for flange thicknesses between 14 and 20 mm, allowing broad applicability in various installation scenarios.

Compatibility and accessories
The EM912S is specifically designed for carrier flanges with a thickness of 14 to 20 mm. The clamp is suitable for mounting device enclosures, fittings, and similar components.

Installation and mounting
Mounting is performed by hammering the clamp into the flange, pressing it firmly into the flange structure. Subsequently, the M6 x 11 mm threaded stud is screwed into the designated hole in the clamp to secure the fastening. The installation requires no additional tools other than a hammer and a screwdriver. The clamp is easy to install and offers a quick and secure fastening solution.

Operational advantages
The spring steel construction ensures high load capacity and long service life. The clamp remains stable even under slight vibrations and movements during operation. The use of a threaded stud increases the security of the fastening and prevents loosening under load. The clamp is easy to install and requires no special tools, which speeds up installation and reduces working time. The zinc coating protects the material from corrosion and increases service life in damp or corrosive environments.

Zinc coating
The clamp is coated with zinc, forming a corrosion-protective layer. This coating increases resistance to moisture and environmental influences, especially in outdoor applications or damp indoor areas. Zinc coating is a standard measure in fastening technology to extend the service life of metal components.

Spring steel
The use of spring steel ensures high elasticity and strength. Spring steel is a special steel material designed to withstand elastic deformation without permanent deformation. This is essential for the clamp's function, which is fixed by hammering into the flange and must react elastically during installation.

Threaded stud
The M6 x 11 mm threaded stud serves as additional anchoring. It is screwed into the designated hole in the clamp and mechanically secures the fastening. The exact dimensions of the threaded stud are crucial for proper function and stability of the fastening.

Carrier flange
The carrier flange is the metallic surface to which the clamp is attached. The clamp is designed for flange thicknesses of 14 to 20 mm, enabling broad applicability in various installation scenarios. The flange thickness must be within this range to ensure secure fastening.

Fastening technology
The fastening technology is based on the principle of hammering into the flange, pressing the clamp firmly into the structure. Additional anchoring with a threaded stud increases the security and stability of the fastening. This technology is widely used in electrical and installation technology, as it enables quick and reliable mounting.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/331955
qrcode für Erico 171850 CADDY EM912S Clamp Zinc 14-20 mm