| General |
| Material | Spring steel |
| Surface coating | Zinc coating |
| Flange thickness | 8-14 mm |
| Threaded rod | M6 |
The Erico CADDY EM58 is a fastening element made of spring steel, specifically designed for mounting device boxes, fittings, and other components onto carrier flanges. It is a clamp that is inserted into the flange by striking, creating a secure mechanical connection. The fastening is designed for flange thicknesses between 8 and 14 mm and allows for the insertion of an M6 threaded rod. The surface is zinc-coated, providing a corrosion-resistant protective layer and enhancing suitability for use in damp or mildly aggressive environments.
Fastening element
This product serves as a mechanical connection between a component and a carrier flange. It is not screwed in, but inserted into the flange by striking, causing it to elastically deform and anchor itself in the material. This method enables quick and tool-free installation, particularly in electrical installations, where flat metal flanges often serve as the mounting base.
Applications
The CADDY EM58 is primarily used in electrical installations, where device boxes, switches, sockets, or other electrical components must be mounted onto metal flanges. The fastening is suitable for carrier flanges with a thickness of 8 to 14 mm, covering a wide range of standard constructions. It can be used in both indoor and outdoor environments, with the zinc coating providing additional corrosion protection.
Functions and features in detail
The clamp is made of spring steel, known for its high elasticity and strength. When struck, the clamp elastically deforms and grips into the flange, creating a secure connection. The inner side of the clamp is designed to accommodate an M6 threaded rod, which is then used to fasten the actual component. The zinc coating ensures a longer service life, especially in environments with increased humidity.
Technology explained simply
The spring steel construction allows the clamp to elastically deform when inserted into the flange and then return to its original shape. This creates a clamping and holding effect that secures the clamp within the flange. The M6 reception is standardized and compatible with common threaded rods used in electrical installations. The zinc coating acts as a barrier against moisture and oxidation, ensuring long-term functionality.
Compatibility and accessories
The CADDY EM58 is compatible with carrier flanges with thicknesses ranging from 8 to 14 mm.
Installation and mounting
Mounting is done by striking the clamp into the flange. The clamp is inserted into the flange hole and driven in using a suitable tool, such as a hammer or a specialized fastening tool. During this process, the clamp elastically deforms and securely grips within the flange. Subsequently, the M6 threaded rod is screwed into the clamp to fasten the component. The installation requires no additional tools beyond the striking tool.
Operational advantages
The fastening enables quick and tool-free installation, as no screws or rivets are required. The spring steel construction ensures a stable connection that remains secure even under mechanical stress. The zinc coating increases service life and makes the clamp suitable for use in humid environments. The standardized M6 reception ensures compatibility with common components.