General
Diagonal	48 cm
Display technology	TFT LCD -
Resolution	1280 x 1024 Pixel
Pitch	0,294 mm
Maximum brightness	1000 cd/m²
Contrast	900 -
Horizontal viewing angle	170 °
Vertical viewing angle	170 °
Horizontal frequency	30 – 100 kHz
Vertical frequency	50 – 100 Hz
Signal inputs	DVI-I, 15pin-DSub, 3x BNC, 1x BNC (CVBS), 4pin-Mini DIN -
Signal output	1x BNC (SoG/G) -
Graphics signals	DVI (single link), Analog (DVI-I, 15pin-SubD, BNC) -
Video level	0,5 ... 1,4 Vpp
Sync level	0,2 ... 0,3 Vpp
Formats	VGA, SVGA, XGA, SXGA -
Power consumption	58 W
Protection class	IP20 -
Colour housing	Anthracite -
Safety standard	DIN EN 60601-1 -
EMC standard	DIN EN 60601-1-2 -
Markings	EN60601-1, CSA C22.2 No.601.1, UL60601-1, EN60601-1-2 limit B, FCC Class A, MPR II -
Visible screen size	376 x 301 mm
Visible diagonal	481 mm
Displayable colours	16.7 million -
Grey scale reproduction	DICOM-, CIE- or gamma tone curve -
DICOM brightness	400 cd/m²
Force Mode	Yes -

The Eizo SMD19102-D is a 19-inch TFT-LCD monitor for medical use, specifically designed for applications in surgery, endoscopy, ultrasound, computed tomography (CT), and magnetic resonance tomography (MRT). As a diagnostic display with grayscale reproduction, it offers a resolution of 1280 x 1024 pixels (1.3 megapixels) and is designed for the precise display of medical image data. Image quality is supported by a maximum brightness of 1000 cd/m² and a contrast ratio of 900:1, enabling clear differentiation of gray tones. The integrated Look-Up-Tables (LUTs) contain preset settings optimized for various medical modalities.

Applications include the display of images from endoscopy devices, ultrasound devices, CT and MRT systems. The monitor is designed for use in clinical environments where high image accuracy and reliability are required. The grayscale reproduction is achieved using DICOM-, CIE- or Gamma-tone curves, with the DICOM curve specified at a brightness of 400 cd/m². This ensures standardized and reproducible display of medical images.

Functions and equipment in detail include the EIZO-specific Force Mode, which allows the monitor to adapt to different image formats, resolutions, and frame rates. This is particularly useful when replacing older CRT screens, which often do not provide standardized signals. Signal inputs include DVI-I, 15pin-DSub, three BNC connectors (for SoG/G, H, V), and one BNC connector for CVBS signals. Additionally, a 4pin-Mini-DIN connector is available. An output signal (1 x BNC for SoG/G) enables pass-through operation, allowing the signal to be forwarded to another receiver.

Technology explained simply shows that the monitor features high viewing angle stability, with up to 170° horizontally and vertically. This ensures uniform image quality even when viewed from the side, which is important in operating rooms or when multiple users are present. The horizontal frequency ranges from 30 to 100 kHz, and the vertical frequency from 50 to 100 Hz. Supported formats include VGA, SVGA, XGA, and SXGA, both in non-interlaced and interlaced variants. Graphics signals are transmitted via DVI (single link) and analog interfaces (DVI-I, 15pin-SubD, BNC). Video levels range from 0.5 to 1.4 Vpp, depending on the signal type, and sync signals are TTL-compatible.

Compatibility and accessories refer to the variety of connections that enable integration into existing medical systems. The signal inputs are designed for various digital and analog sources, increasing flexibility in use. Optionally, a conformance test according to DIN EN 6868-57 is available as a separate item, confirming the monitor’s compliance with medical requirements.

Mounting and installation is done in a housing made of anthracite, with dimensions of 422 mm (width) x 348 mm (height) x 95 mm (depth), without a stand. The weight is 6.4 kg (without stand). The protection class IP20 protects against finger contact and vertical dripping water, which is sufficient for indoor use. The maximum power consumption is 58 W.

Operational advantages lie in the high image quality, flexibility of inputs, and adaptability to various medical devices. Device safety complies with standards DIN EN 60601-1 and DIN EN 60601-1-2, allowing use in the medical field. The warranty period is 3 years.

The markings include EN60601-1, CSA C22.2 No.601.1, UL60601-1, EN60601-1-2 limit B, FCC Class A, and MPR II, confirming compliance with international safety and EMC standards. The maximum visible screen size is 376 mm (width) x 301 mm (height), with a visible diagonal of 481 mm. The number of displayable colors is 16.7 million, which is not relevant for grayscale reproduction but is technically specified.

The monitor is designed for use in medical facilities where high image quality, reliability, and safety are required. Integrated features such as Force Mode and the wide range of connections enable flexible integration into existing systems. Compliance with standards DIN EN 60601-1 and DIN EN 60601-1-2 ensures safety and EMC compatibility in the medical environment.