| General |
| Degree of protection | not specified |
| Load capacity | 45 kg |
| Built-in depth | 498-800 mm |
| HE | 2-3 |
| Scope of delivery | 1 pair of rails (right/left), mounting material |
| Mounting method | withdrawable |
| Compatibility | 19" rack systems |
| Number | 1 pair |
These extendable mounting rails from EFFEKTA Regeltechnik are specifically designed for use in 48,3 cm ( 19 inch )-enclosure systems. They provide secure mounting and fastening of devices, particularly UPS systems or other compact units, installed in a 2- to 3-HE space (corresponding to a height of 84 mm). The rails are supplied as a pair (right and left) and allow for a variable mounting depth of 498 to 800 mm, enabling flexible adaptation to different device dimensions. The maximum load capacity is 45 kg, allowing the installation of even heavier components.
Mounting rails for 48,3 cm ( 19 inch )-enclosure systems offer a stable and mobile mounting base. They are particularly suitable for devices that require frequent maintenance, replacement, or exchange, as they enable easy accessibility. The variable depth of 498 to 800 mm ensures that devices with different front panel distances can be securely mounted. The rails are designed for mounting in 2- to 3-HE height, equivalent to a total height of 84 mm – a standard size in IT and control technology.
Functions and equipment in detail include the extendable design, which allows for easy handling and maintenance of mounted devices. The rails are supplied as a pair (right and left), ensuring symmetrical mounting within the enclosure. The load capacity of up to 45 kg is sufficient for most standard applications, especially when dealing with UPS systems or small network components. The included mounting hardware comprises all necessary screws and nuts to securely fasten the rails in the enclosure.
Technology explained simply shows that the rails are made of robust metal to ensure required stability and load distribution. The extension mechanism is designed to provide secure holding without damaging the device. The variable depth is achieved through a rail guide with multiple adjustment positions, which can be set by simply sliding and fixing the rail. Mounting is done in standard 48,3 cm ( 19 inch )-enclosure profiles, with the rails attached at the side mounting points.
Compatibility and accessories include use in 48,3 cm ( 19 inch )-enclosure systems, particularly in combination with UPS systems or other devices mounted in 2- to 3-HE height. The rails are compatible with common enclosure profiles and can be used in standard 48,3 cm ( 19 inch )-racks. As suitable accessories, an L-rail (variable, length 502–849 mm, light grey, 1 pair) is offered, also suitable for mounting in 48,3 cm ( 19 inch )-enclosure systems. These L-rails can be used in addition to the sliding rails to provide additional mounting points or better load distribution.
Mounting and installation are carried out by securing the rails to the side profiles of the 48,3 cm ( 19 inch )-enclosure. The included mounting materials (screws, nuts) enable secure installation. The rails are positioned at the desired depth (between 498 and 800 mm) and fixed. Installation requires no special tools, only a screwdriver or appropriate screwdriver bit. Devices are then placed onto the rails and can be extended and retracted as needed.
Advantages in operation lie in the easy accessibility of mounted devices, significantly simplifying maintenance, inspection, and component replacement. The variable depth allows optimal adaptation to different devices, increasing flexibility within the enclosure. The high load capacity of 45 kg ensures secure mounting even for heavier units. The rails are designed for use in IT and control technology installations, where reliability and accessibility are critical.
The rails are
order-specific and
non-cancellable, meaning they cannot be returned or cancelled after ordering. This is typical for specific mounting accessories tailored to individual requirements.
Batteries are not included in the delivery scope.