Further information for Moeller 288863 M22-R*-*-RH potentiometer robust
General
Design
RMQ classic
Type identifier
M22
Built-in diameter
22,5 mm
Number of connections
3
Resistance value accuracy
±10 %
Characteristic
Linear
Actuation button
large
Resistance
Selectable
Rated power
0,5 W
Degree of protection
IP66
Front ring
Titanium
Standards
IEC/EN 60947, VDE 0660
SmartWire-DT connection
This product is a potentiometer from the M22-R*-*-RH series by Eaton, designed for use in industrial control and regulation systems. It features a classic RMQ design and is configured as a single unit to be installed in control panels or enclosures with an installation diameter of 22.5 mm. The operating knob is large-sized to enable safe and precise operation even with low visibility or when wearing protective gloves. The IP66 protection rating ensures high mechanical and electrical reliability, as the device is dust-tight and protected against water jets from all directions, making it suitable for outdoor use or in humid industrial environments. The front ring is made of titanium, providing high corrosion resistance and mechanical strength.
Potentiometer with selectable resistance value allows flexible adaptation to various applications. The resistance value accuracy is ±10 % (linear), which is sufficient for many industrial control tasks. The rated power of 0.5 W defines the maximum electrical load the device can safely handle without risking thermal overload. The three separate screw terminals facilitate wiring and ensure a secure electrical connection. The device is not intended for connection to SmartWire-DT, meaning it cannot be integrated into systems based on this fieldbus technology.
Applications include industrial controls, machine building, plant engineering, and regulation technology, where manual adjustment of voltages, currents, or other electrical quantities is required. The robust construction and high protection rating make it particularly suitable for demanding environments where mechanical stress, moisture, or dust are present. The potentiometer can be integrated into various systems to manually regulate, for example, rotational speeds, temperature values, or light intensities.
Functions and equipment in detail include the previously mentioned features such as the large operating knob, screw terminals, and titanium front ring. The selectable resistance value option allows adaptation to specific requirements, although the exact resistance value selection is not specified in the product text. The linear characteristic of the potentiometer means that the resistance value changes proportionally to the rotation position of the knob, ensuring uniform control.
Technology explained simply shows that the potentiometer functions as a variable resistance component. By rotating the operating knob, the electrical contact within the resistor is moved, thereby varying the effective resistance value between two terminals. The three terminals allow use as a voltage divider or as a variable load. The IP66 protection rating means the device remains functional even under direct water spray and dust exposure, which is relevant for use in production halls, outdoors, or in the food industry.
Compatibility and accessories include various supplements that adapt the device to specific control panels or improve operability. These include mounting enclosures such as M22-I2 or M22-I1, which prepare the device for mounting on front panels. Push-button accessories such as M22S-ST-GB7 (RUN) or M22S-ST-D8 (STÖRUNG) allow labeling of the operating knob with function texts to simplify operation. Mounting plates such as M22-E4 or M22-EY1 are used for mounting multiple devices in a panel. Hoods such as M22-H5 or M22-H1 provide additional protection for the operating knob against mechanical impact or contamination. The mounting adapter M22-ADC with dust protection is suitable for 3-way mounting and offers additional protection against contamination.
Mounting and installation is done by installing the device into a hole with a diameter of 22.5 mm. The screw terminals enable secure and durable wiring. Installation typically occurs in enclosures, control panels, or machine fronts. The use of accessories such as mounting plates or mounting enclosures can simplify installation and facilitate integration into existing systems. Wiring is done via the three screw terminals, with the exact assignment of terminals (e.g., for voltage divider or variable load) depending on the specific application.
Operational safety is ensured by the high IP66 protection rating and robust construction. The device is designed for use in industrial environments where mechanical stress, moisture, or dust may occur. The linear characteristic and selectable resistance value option enable precise and flexible control. The use of titanium for the front ring increases service life and resistance to corrosion. The rated power of 0.5 W ensures the device is not overloaded under normal operating conditions.
Standards and regulations include IEC/EN 60947 and VDE 0660, which apply to the safety and functionality of switching devices in electrical installations. These standards guarantee that the device meets requirements for electrical safety, mechanical strength, and operational reliability. Compliance with these standards is important for use in industrial plants to ensure the safety of the installation and operators.