Eaton 278482, EAN: 4015082784829

Moeller 278482 Motor Protection Switch 3-pole 2.5-4A

Industrial Material > Control devices / Pilot devices > Motor protection switch

Moeller 278482 Motor Protection Switch 3-pole 2.5-4A

Lieske Part No. 897659
Mfg Part No 278482
EAN-Code 4015082784829
Manufacturer Eaton
Here only 95,74 EUR
113,93 EUR incl. VAT

Further information for Moeller 278482 Motor Protection Switch 3-pole 2.5-4A

General
Degree of protectionIP20
Rated operating voltage690 V
Number of poles3
Adjustment range of overload release2,5-4 A
Short-circuit releaseinstantaneous, 4 × Iu
Mounting methodscrew and snap mounting
Cap mounting dimension45 mm
NormIEC/EN60947
Finger-safeaccording to VDE 0106 T. 100
Phase failure sensitiveYes
The PKZM01-4 motor protection switch from Eaton is a 3-pole protection switch for safeguarding electric motors and drive systems in industrial applications. It complies with IEC/EN60947 standards and is designed for use in electrical installations with a rated operational voltage of up to 690 V. The switch features adjustable overload trip units and an instantaneous short-circuit trip unit, providing protection against both thermal overload and sudden short circuits. The phase-loss-sensitive version detects and responds to phase failures in the network, which is particularly important in critical installations. Mounting is possible either by screw or snap-in method, with a cap mounting height of 45 mm. The protection rating IP20 ensures protection against finger contact, in accordance with VDE 0106 T. 100, and is suitable for use in enclosed switchgear.

Applications

The PKZM01-4 motor protection switch is intended for use in industrial and commercial electrical installations, particularly in drive technology, pumps, fans, conveyor systems, and other motor-driven systems. It protects electrical components from damage caused by overload, short circuit, and phase failure. The mounting dimensions and mounting variants make it compatible with standard DIN rails (EN 22) in various widths (7.5 mm or 5.5 mm), enabling flexible integration into existing switchgear.

Functions and Equipment in Detail

The switch offers adjustable overload trip units, which can be set in the range of 2.5 to 4 A to precisely match the rated current of the connected motor. The short-circuit trip unit is instantaneous and set to 4 times the rated current (4 × Iu), ensuring rapid disconnection in case of sudden current surges. The phase-loss-sensitive function monitors phase supply and disconnects the motor if any phase fails, preventing mechanical damage to the drive. The switching state (on/off) is directly visible on the device, facilitating status monitoring during operation.

Technology Explained Simply

The technology of the PKZM01-4 is based on an electromechanical protection principle. The overload protection function is implemented via a thermal bimetal strip, which heats up under prolonged overload and triggers the switch to trip. The short-circuit trip unit operates electromagnetically and reacts immediately to high current surges. The protection rating IP20 means the device is protected against finger contact but not against dust or water – therefore, it is intended for use in enclosed switchgear, not for outdoor applications. The mounting height of 45 mm allows installation on standard DIN rails, with the snap-in mounting enabling quick and tool-free installation.

Compatibility and Accessories

The PKZM01-4 can be extended with various accessories to meet specific requirements. These include undervoltage trip units (e.g. U-PKZ0(24VDC), U-PKZ0(230V50Hz), U-PKZ0(480V60Hz)), which automatically trip the switch during voltage dips. Auxiliary switches such as NHI21-PKZ0 (2NO1NC) or NHI11-PKZ0 (1NO1NC) enable remote monitoring of the switching state. Insulating housing options like CI-PKZ01-G or CI-PKZ01-SVB-V provide additional protection and increase the protection rating to IP65, suitable for harsh environments. Additional components such as supply terminals (BK25/3-PKZ0), busbar adapters (BBA0-25), or cables (BBA-XLT-16-142) can be used to adapt to specific switchgear requirements.

Mounting and Installation

Mounting is possible either by screw or snap-in method onto DIN rails (EN 22) with a height of 7.5 mm or 5.5 mm. The cap height is 45 mm, allowing for compact placement in switch cabinets. The snap-in mounting allows for tool-free installation, reducing mounting time. The mounting dimensions and variants are standardized, enabling the switch to be integrated into many existing switchgear systems. The connection terminals are designed for wiring connections, with the exact cross-section size to be determined based on application and load.

Operational Advantages

The PKZM01-4 provides reliable protection for electric motors through the combination of thermal overload and electromagnetic short-circuit trip units. The phase-loss-sensitive version enhances safety in critical installations. The adjustable overload trip units allow precise adaptation to motor current, avoiding unnecessary disconnections. The visible switching state indicator simplifies maintenance and monitoring. The snap-in mounting accelerates installation, and compatibility with various accessories expands the range of applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/897659
qrcode für Moeller 278482 Motor Protection Switch 3-pole 2.5-4A