Eaton 277050, EAN: 4015082770501

Moeller 277050 DILM17-01(RDC24) Contactor 7.5 kW

Industrial Material > Industrial relays and contactors > Contactors

Moeller 277050 DILM17-01(RDC24) Contactor 7.5 kW

Lieske Part No. 499481
Mfg Part No 277050
EAN-Code 4015082770501
Manufacturer Eaton
Here only 170,85 EUR
203,31 EUR incl. VAT

Further information for Moeller 277050 DILM17-01(RDC24) Contactor 7.5 kW

Features
Product typeContactor
Product colourBlack, White
Number of poles3
International Protection (IP) codeIP00
Weight & dimensions
Width56 mm
Height85 mm
The Eaton DILM17-01(RDC24) is a power contactor for use in industrial applications, particularly for controlling and protecting electric motors. It is a 3-pole device designed for motor control up to 170 A. The contactor unit is suitable for various duty categories, including AC-1 for non-inductive or slightly inductive loads such as resistance furnaces, as well as NAC-3 and AC-4 for squirrel-cage motors, with the latter category also covering applications such as starting, plugging, reversing, and inching. The connection technique uses screw terminals, ensuring a secure and robust connection. The device is suitable for use with motors of efficiency class IE3, with IE3-capable devices marked by a specific logo on the packaging.

Applications
This contactor is primarily intended for use in industrial drive technology, especially in systems where motors with a power up to 7.5 kW at 400 V DC are operated. It is suitable for applications requiring reliable and safe switching functions, such as in production plants, conveyor systems, or machine building. The rating is based on standard AC-3 at 380 V and 400 V with a rated operational current of Ie = 18 A. The AC-1 category refers to conventional thermal current for 3-pole configuration.

Functions and Equipment in Detail
The device features a 3-pole switching configuration designed for connecting three phase conductors in a three-phase system. The screw terminals allow for simple and secure wiring. The contactor unit is designed for use in electrical circuits where mechanical disconnection of circuits is required to ensure the safety of the installation and operators. The switching function is performed via an electromagnetic coil activated by a control voltage.

Technology Explained Simply
The contactor operates on the principle of an electromagnetic switch. When the control voltage is applied, the coil becomes magnetized and pulls an armature, closing the main contacts. This closes the circuit for the load (e.g., an electric motor). When the control voltage is switched off, the armature drops, and the contacts open. The protection rating IP00 means the device is neither dust- nor water-tight and is therefore not suitable for outdoor use or in damp environments. Dimensions are 56 mm (width) and 85 mm (height), enabling a compact design suitable for standard control panels.

Compatibility and Accessories
The contactor can be combined with various accessories to extend its functionality. These include, for example, motor protection relays such as the ZB150-175 or ZB32-6, which monitor motor load and protect against overloads. Auxiliary switches such as the DILA-XHI04 or DILA-XHIV11 enable additional signals or control functions. Replacement coils such as the DILM32-XSP(24V50Hz) or time-delay modules such as the DILM32-XTEE11(RA24) for delayed response functions can be added as required. Mechanical interlocks (DILM32-XMV) or connectors (DILM32-XVB) are also available to optimize installation and operation.

Mounting and Installation
Mounting is performed in standard control panels or enclosures. The screw terminals allow for easy and secure connection of wires. The dimensions of 56 mm width and 85 mm height correspond to common module sizes, enabling seamless integration into standard control panels. Installation must comply with applicable electrical standards and regulations, ensuring correct wiring and grounding.

Advantages in Operation
The contactor provides a reliable and robust switching function for industrial applications. The use of screw terminals ensures a durable and secure connection. Compatibility with various accessories allows flexible adaptation to specific requirements. Suitability for motors of efficiency class IE3 supports use in energy-efficient systems. The compact design fits standard control panels, facilitating integration into existing systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/499481
qrcode für Moeller 277050 DILM17-01(RDC24) Contactor 7.5 kW