| General |
| Degree of protection | IP20 |
| Actuation voltage | 24 V DC |
| Type of current | DC operation |
| Connection system | Screw terminals |
| Rated operational current AC-15 | 4 A |
| Contacts Normally open (NO) | 2 S |
| Contacts Normally closed (NC) | 2 O |
| Code number and version | 22E |
| Combinable with | DILA-XHI(V) |
| Coil terminal markings | in accordance with EN 50005 |
| Contact numbers | according to EN 50011 |
The Eaton DILA-22(24VDC) is an auxiliary contactor from the DILA relay series, designed for use in industrial control and switching systems. It serves as a base unit with positive operating contacts and enables the control of auxiliary functions in electrical circuits. Operation is via a direct voltage of 24 V DC, with coil connections marked according to the EN 50005 standard. Contact numbers comply with EN 50011, ensuring uniform and clear identification in circuit diagram creation.
Auxiliary contactor
This device features two normally closed contacts (2 S) and two normally open contacts (2 Ö), making it suitable for various applications in control engineering. The contacts are rated for a nominal operating current of 4 A, with nominal voltage ratings for AC-15 at 220 V, 230 V, 240 V, as well as 380 V, 400 V, and 415 V. Connections are made via screw terminals, ensuring a secure and durable connection.
Functions and equipment in detail
The DILA-22(24VDC) is designed as a base unit and can be combined with additional auxiliary switch modules from the DILA-XHI(V) series to increase the number of contacts. The combination code and version are designated as 22E, facilitating identification and selection of the correct module within the system. The protection rating IP20 safeguards against finger contact and ingress of solid foreign objects larger than 12.5 mm, but does not protect against water or dust.
Technology explained clearly
The operating voltage of 24 V DC is a common voltage in industrial automation technology, as it provides sufficient power for the coil without requiring high safety standards. The direct current operation ensures precise and reliable switching function. The contacts are designed for operation in AC-15 service categories, which is typical for switching operations in electrical installations.
Compatibility and accessories
The device is compatible with various accessory modules, including time modules such as DILM32-XTED11-1(RA24) or DILM32-XTED11-100(RAC130), which can be used for delayed or latching functions. Additionally, protective circuits such as varistors (e.g., DILM12-XSPV500) or diode protective circuits (e.g., DILM12-XSPD) can be used to protect the coil against overvoltages. Auxiliary switch modules such as DILA-XHI10-S or DILA-XHIT20 allow for expansion of the number of contacts.
Mounting and installation
Mounting is done in standard plug-in module dimensions, suitable for use in enclosures and control systems. The screw terminals allow for easy and secure connection of wires. Installation typically occurs in enclosed switching systems, with the IP20 protection rating requiring use in indoor environments.
Advantages in operation
The DILA-22(24VDC) provides a reliable and low-maintenance switching function with clearly defined contact markings. The combinability with various accessory modules extends functionality and allows flexible adaptation to specific requirements. The use of screw terminals ensures a stable connection that remains secure even under mechanical stress. The standard-compliant markings and contact numbers simplify planning and maintenance of the system.