Eaton 276407, EAN: 4015082764074

Moeller 276407 contactor DILA-22(230V50/60HZ) 2S/2Ö AC

Industrial Material > Industrial relays and contactors > Contactors

Moeller 276407 contactor DILA-22(230V50/60HZ) 2S/2Ö AC

Lieske Part No. 274117
Mfg Part No 276407
EAN-Code 4015082764074
Manufacturer Eaton
Here only 53,14 EUR
63,24 EUR incl. VAT

Further information for Moeller 276407 contactor DILA-22(230V50/60HZ) 2S/2Ö AC

Features
Product colourBlack, Grey
Operating temperature (T-T)-25 - 60 °C
The product is an auxiliary contactor of the DILA series by Eaton, type DILA-22(230V50/60HZ), with manufacturer number 276407. It serves as an auxiliary contact in electrical control and switching systems, particularly in industrial applications, where control of auxiliary functions such as signal indication, feedback, or interlocking is required. The device is designed for an operating voltage of 230 V at a frequency of 50/60 Hz and operates with AC actuation. The contacts are designed as positive operating contacts, meaning they are mechanically constructed to reliably close or open upon actuation, regardless of the electrical load. The protection rating IP20 ensures protection against finger contact and solid foreign objects, but not against water or dust – thus it is intended for use in enclosed, dry indoor environments.

Applications
This auxiliary contactor is suitable in industrial electrical engineering for controlling auxiliary functions in systems such as machine controls, drive technology, or safety circuits. It can be used, for example, to provide feedback on the switching state of a main contact, to control signals, or to interlock switching operations. Compatibility with auxiliary switch modules of the DILA-XHI(V) series allows flexible expansion of the contact arrangement, enabling the number of normally closed and normally open contacts to be adjusted according to requirements.

Functions and Equipment in Detail
The device features two normally closed contacts (2 S) and two normally open contacts (2 Ö), connected via screw terminals. The rated operational currents are 4 A for voltage ranges of 220 V to 240 V and 380 V to 415 V, according to switching class AC-15. Contact numbering conforms to standard EN 50011, and coil terminal markings follow standard EN 50005. These standards ensure uniform and clear identification of contacts and terminals, simplifying installation and maintenance. The operating temperature of the device ranges from -25 °C to +60 °C, allowing use in environments with moderate temperature fluctuations.

Technology Explained Simply
The positive operating contact design means the contacts are mechanically constructed to reliably reach their end position upon actuation, regardless of the electrical load. This increases circuit reliability, especially during frequent switching operations. The screw terminals enable a secure and mechanically stable connection of conductors, which is essential for industrial applications. Actuation is performed via a coil supplied with 230 V AC, which moves the armature and switches the contacts. The IP20 protection rating protects against direct finger contact and solid foreign objects, but is not suitable for humid or dusty environments.

Compatibility and Accessories
The device is compatible with various auxiliary switch modules of the DILA-XHI(V) series, such as the DILA-XHI22 (2S2Ö) or DILA-XHIT22 (2S2Ö), which can be used to expand the contact arrangement. Additionally, time modules such as the DILM32-XTEE11(RA24) or protective circuits such as the DILM12-XSPR240 are available for supplementary use depending on the application scenario. Combining these modules extends the functionality of the base unit and enables application-specific adaptation.

Mounting and Installation
Mounting is typically performed on a control panel or within an enclosure. The screw terminals allow for a secure connection of conductors, with contact numbering according to EN 50011 and coil terminal markings according to EN 50005 ensuring correct assignment. Installation must take place in a closed, dry room, as the IP20 protection rating does not offer protection against moisture or dust. The operating temperature range of -25 °C to +60 °C must be considered when planning the mounting environment.

Advantages in Operation
The positive operating contact design ensures high switching reliability, especially during frequent switching operations. The screw terminals provide a mechanically stable connection that withstands industrial conditions. Compatibility with various auxiliary switch modules allows flexible adaptation to different requirements. Compliance with standards EN 50011 and EN 50005 simplifies planning and maintenance of the system. The operating voltage of 230 V is commonly available in many industrial installations, simplifying integration into existing systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/274117
qrcode für Moeller 276407 contactor DILA-22(230V50/60HZ) 2S/2Ö AC