Eaton 217436

Moeller 217436 selector switch 3 positions blank

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Moeller 217436 selector switch 3 positions blank

Lieske Part No. 763958
Mfg Part No 217436
EAN-Code
Manufacturer Eaton
Here only 20,31 EUR
24,17 EUR incl. VAT

Further information for Moeller 217436 selector switch 3 positions blank

General
Degree of protectionIP66
Construction typewith lever handle, latching
Number of positions3
Front ring materialTitanium
Connection typeRMQ-SWD connections
StandardsIEC/EN 60947, VDE 0660
Functionlatching, with plunger bridge for middle contact
AssortmentRMQ-Titan
Type of deviceSingle device
Connection to SmartWire-DTYes
The product is a selector switch of type M22-WRK3-* from the RMQ-Titan range by Eaton. It is a single unit with a knob handle, designed to be operated in three positions with positive detent action. The switch component is designed for use in industrial control systems, particularly in environments requiring high mechanical and electrical durability, as well as protection against dust and water. The front dimension is 29.7 mm, defining the mounting size for standard socket panels and control panels. The front ring is made of titanium, ensuring high corrosion resistance and mechanical strength.

Selector switch with positive detent function allows for secure and precise positioning in one of the three positions. Operation is performed via a knob handle, providing clear mechanical feedback. The switches are designed for use in control and switching installations where reliable and repeatable actuation is required. The protection rating IP66 ensures a high level of protection against dust and water, including strong water jets, enabling use in outdoor environments or humid production areas. The front dimension of 29.7 mm corresponds to the standard size for built-in devices in industrial control panels.

Technology explained simply: The switches are equipped with RMQ-SWD connections, enabling direct integration into the SmartWire-DT system. This system supports decentralized control and communication in industrial plants and reduces cabling requirements. Connection is made via special terminal clamps optimized for SmartWire-DT technology. The switches feature a plunger bridge for the center contact, enabling electrical connection between contacts in the center position. This is particularly relevant for applications where a specific switching function must be activated in the middle position.

Compatibility and accessories: The device is interchangeable with Codi parts of type M22-XC-Y, enabling flexible integration into existing installations. Various contact elements such as M22-CK02 (2NC front), M22-AK10 (1NO front), or M22-K10-GVP (1NO front) can be combined to achieve the desired switching function. Additional push-button accessories such as M22S-ST-GB1 (START) or M22S-ST-GB0 (STOP) are available to label the operation. Mounting plates such as M22-E4 (4-way) or M22-E6 allow installation of multiple switches in a single panel. Mounting adapters such as M22-A or M22-ADC (with dust protection) support installation in various enclosure configurations. Hoods such as M22-H3 or M22-H6 provide additional protection and visual distinction.

Mounting and installation: Mounting is performed in standard socket panels or on special mounting plates. The front dimension of 29.7 mm matches the standard mounting size for industrial control elements. The switches are designed for direct built-in connection, with RMQ-SWD connections enabling integration into SmartWire-DT systems. The use of mounting adapters or mounting plates facilitates installation in various enclosure configurations.

Operational advantages: The positive detent function ensures stable and unambiguous positioning in each of the three positions. The IP66 protection rating allows use in demanding environments, including humid or dusty production areas. Compatibility with SmartWire-DT reduces cabling requirements and simplifies system integration. Interchangeability with Codi parts M22-XC-Y increases flexibility during system expansion or replacement. The titanium front offers high mechanical strength and corrosion resistance, extending the device’s service life.

The standards IEC/EN 60947 and VDE 0660 define the electrical and mechanical requirements for switches and switching devices, which the product meets. These standards ensure safety and reliability in industrial applications. The switches are designed for use in control and switching installations where high operational safety and longevity are required. The combination of positive detent function, IP66 protection rating, and SmartWire-DT compatibility makes the device a robust solution for industrial applications.

The front dimension of 29.7 mm enables mounting in standard socket panels. The switches are designed for direct built-in connection, with RMQ-SWD connections enabling integration into SmartWire-DT systems. The use of mounting adapters or mounting plates facilitates installation in various enclosure configurations.

The standards IEC/EN 60947 and VDE 0660 define the electrical and mechanical requirements for switches and switching devices, which the product meets. These standards ensure safety and reliability in industrial applications. The switches are designed for use in control and switching installations where high operational safety and longevity are required. The combination of positive detent function, IP66 protection rating, and SmartWire-DT compatibility makes the device a robust solution for industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/763958
qrcode für Moeller 217436 selector switch 3 positions blank