Eaton 216887, EAN: 4015082168872

Moeller 216887 M22-WRS Key Switch 2 Positions

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Moeller 216887 M22-WRS Key Switch 2 Positions

Lieske Part No. 825458
Mfg Part No 216887
EAN-Code 4015082168872
Manufacturer Eaton
Here only 67,88 EUR
80,78 EUR incl. VAT

Further information for Moeller 216887 M22-WRS Key Switch 2 Positions

General
Degree of protectionIP66
Construction typekey operation, latching
Positions2
Position designationI, 0
Front ring materialTitanium
ConnectionsRMQ-SWD
Key1
Replaceable withCoding parts M22-XC-Y
Convertible withCoding adapters M22-XC
StandardsIEC/EN 60947, VDE 0660
Connection to SmartWire-DTYes
The Eaton key switch M22-WRS belongs to the RMQ-Titan product series and is designed as a single unit for industrial control and operating tasks. It features a key operation with latching function and offers two positions marked as I and 0. The switch is not intended for use in locking systems and is primarily used for secure and controlled operation of machines or plants, where access to the control is restricted by a key. The front dimension is 29.7 mm, allowing it to fit into standard socket panels or operating panels with the corresponding hole. The front ring is made of titanium, ensuring high corrosion resistance and mechanical strength.

Key switch
The M22-WRS is a key switch featuring both latching and push functions. The latching function allows the switch position to be held securely, while the push function enables temporary actuation, returning to the default position after release. This combination offers flexibility in control, depending on whether a continuous or temporary action is required. The key is removable and can be converted using coding adapters of type M22-XC, enabling adaptation to different access systems. The switch is supplied with a key required for operation.

Protection rating IP66
The IP66 protection rating ensures complete dust tightness and protection against strong water jets from any direction. This makes the key switch suitable for use in harsh environments, such as in manufacturing, machine building, or process engineering, where high mechanical stress, moisture, or dirt are present. The IP66 certification meets the requirements of standards IEC/EN 60947 and VDE 0660, which apply to the safety and reliability of switching devices in industrial applications.

Connection to SmartWire-DT
The M22-WRS is designed for connection to the SmartWire-DT system, enabling integrated communication with control systems. The connection is made via RMQ-SWD connectors, allowing direct integration into existing SmartWire-DT networks. This reduces the need for additional cables and connectors and supports a modular, flexible control architecture. Connection to SmartWire-DT is particularly advantageous in modern, networked production environments where centralized monitoring and control of operating elements are required.

Compatibility and accessories
The key switch is interchangeable with coding parts of type M22-XC-Y, enabling flexible adaptation to existing systems. Various accessories are available, including mounting plates (e.g. M22-XE5), switch add-ons such as label holders (e.g. M22S-ST-X88, M22S-ST-GB7), contact elements (e.g. M22-K01D, M22-CK02), as well as hoods (e.g. M22-H2, M22-H3) and mounting enclosures (e.g. M22-I1, M22-I6). These components extend the functionality and adaptability of the switch to specific requirements. The use of coding adapters (M22-XC) also allows key conversion to realize different access rights or profiles.

Mounting and installation
Mounting is performed in standard socket panels or operating panels with a hole of 29.7 mm. Installation is done by simply inserting into the designated hole and securing with appropriate retaining elements. Connection to the SmartWire-DT system is achieved via integrated RMQ-SWD connectors, eliminating the need for additional cables or adapters.

Operational advantages
The M22-WRS offers high mechanical and chemical resistance due to the titanium front ring, as well as reliable operation in dirty or moist environments thanks to the IP66 protection rating. Integration into SmartWire-DT systems enables efficient control and monitoring, simplifying maintenance and diagnostics of plants. Interchangeability with coding parts and the ability to convert keys using adapters increase the flexibility and lifespan of the device in various application scenarios. Clear marking of positions (I and 0) supports intuitive operation and reduces error sources.

SmartWire-DT technology
SmartWire-DT is a digital control technology that enables serial communication between operating elements and control devices. The M22-WRS uses this technology via RMQ-SWD connectors to transmit status messages and control commands over the network. This reduces the number of required cables and simplifies the installation and maintenance of control systems. The technology is widely used in industrial automation and supports a modular system architecture.

Standards and regulations
The key switch complies with standards IEC/EN 60947 and VDE 0660, which apply to the safety and reliability of switching devices in industrial applications. These standards specify requirements for electrical insulation, mechanical strength, operational safety, and protection rating. Compliance with these standards ensures that the device can be safely and reliably used in industrial environments.

Accessories and extensions
Various accessories are available to extend functionality, including switch add-ons such as label holders for labeling (e.g. M22S-ST-X88, M22S-ST-GB7), contact elements for additional switching functions (e.g. M22-K01D, M22-CK02), as well as hoods and mounting enclosures for use in different mounting configurations. The use of these components allows individual adaptation of the key switch to specific plant requirements.

Functions and equipment in detail
The M22-WRS features a latching key operation with two positions (I and 0), protected by a titanium front ring. The latching function holds the position securely, while the push function enables temporary actuation. The key is removable and can be converted using coding adapters (M22-XC) to realize different access profiles. The front dimension of 29.7 mm allows mounting in standard socket panels. Connection to SmartWire-DT is achieved via integrated RMQ-SWD connectors, enabling direct communication with control systems.

Applications
The key switch is suitable for use in industrial environments, particularly in manufacturing, machine building, and process engineering. It is commonly used in plants where controlled and secure operation is required, such as start/stop switches, mode selection, or access controls. The high mechanical and chemical resistance, as well as the IP66 protection rating, also make it suitable for outdoor use or in moist environments.

Compatibility and accessories
The M22-WRS is compatible with coding parts of type M22-XC-Y and can be converted using coding adapters (M22-XC). Various switch add-ons (e.g. label holders), contact elements, hoods, and mounting enclosures are available as accessories, extending functionality and adaptability. The use of these components allows individual adaptation to specific plant requirements.

Mounting and installation
Mounting is performed in standard socket panels or operating panels with a hole of 29.7 mm. The mounting plate M22-E5 can be used for securing. Installation is done by inserting into the designated hole and securing with appropriate retaining elements. Connection to SmartWire-DT is achieved via integrated RMQ-SWD connectors, eliminating the need for additional cables or adapters.

Operational advantages
The M22-WRS offers high mechanical and chemical resistance, reliable operation in dirty or moist environments, and easy integration into SmartWire-DT systems. Interchangeability with coding parts and the ability to convert keys using adapters increase flexibility and lifespan of the device. Clear marking of positions supports intuitive operation and reduces error sources.

SmartWire-DT technology
SmartWire-DT is a digital control technology that enables serial communication between operating elements and control devices. The M22-WRS uses this technology via RMQ-SWD connectors to transmit status messages and control commands over the network. This reduces the number of required cables and simplifies the installation and maintenance of control systems.

Standards and regulations
The key switch complies with standards IEC/EN 60947 and VDE 0660, which apply to the safety and reliability of switching devices in industrial applications. These standards specify requirements for electrical insulation, mechanical strength, operational safety, and protection rating. Compliance with these standards ensures that the device can be safely and reliably used in industrial environments.

Accessories and extensions
Various accessories are available to extend functionality, including switch add-ons such as label holders for labeling (e.g. M22S-ST-X88, M22S-ST-GB7), contact elements for additional switching functions (e.g. M22-K01D, M22-CK02), as well as hoods and mounting enclosures for use in different mounting configurations. The use of these components allows individual adaptation of the key switch to specific plant requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/825458
qrcode für Moeller 216887 M22-WRS Key Switch 2 Positions