Eaton 216538, EAN: 4015082165383

Moeller 216538 M22-I3 Mounting Enclosure

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Moeller 216538 M22-I3 Mounting Enclosure

Lieske Part No. 920069
Mfg Part No 216538
EAN-Code 4015082165383
Manufacturer Eaton
Here only 25,76 EUR
30,65 EUR incl. VAT

Further information for Moeller 216538 M22-I3 Mounting Enclosure

General
Housing materialPlastic
Screw materialStainless steel
Installation locations3
Cable entry rear2 x M20
Cable entry top2 x M20
Lateral cable entry2 x M20/M25 (1 x per side)
Degree of protectionIP66, IP67, IP69K
Colour RAL valueRAL 7035
Housing lower section colourAnthracite
Suitable forilluminated pushbuttons, illuminated selector switches, key switches, illuminated indicators, EMERGENCY STOP/EMERGENCY OFF buttons with yellow label
Connection to SmartWire-DTNo
The Eaton mounting housing M22-I3, manufacturer's number 216538, is a robust housing for mounting control and signaling devices in industrial applications. It serves as a base for built-in components such as pushbuttons, selector switches, key switches, signal lamps, as well as EMERGENCY STOP and EMERGENCY OFF buttons with yellow labels. The housing is made of plastic and features stainless steel screws, ensuring secure fastening. It is designed for use in environments with high requirements for protection rating and offers protection against dust, water, and cleaning agents, in accordance with standards IP66, IP67, and IP69K. The color of the housing base corresponds to RAL 7035, an anthracite shade, which integrates well in industrial environments.

Applications

The M22-I3 is intended for use in industrial control systems, particularly in plants exposed to high mechanical and chemical stresses. The protection ratings IP66, IP67, and IP69K make it suitable for outdoor use as well as in areas with splashing water, steam, or high-pressure cleaning. It is frequently used in the manufacturing industry, packaging industry, or food processing, where high hygiene and safety requirements exist. Compatibility with various control devices enables flexible use in different control configurations.

Functions and Equipment in Detail

The housing features three mounting positions, allowing multiple components such as pushbuttons, selector switches, or signal lamps to be integrated into a single housing. Cable entry is provided at the rear via two M20 connectors, at the top via two additional M20 connectors, and on each side via one M20 and one M25 connector per side. These diverse entry options offer flexibility in cable routing and simplify installation in complex systems. The stainless steel screws ensure durable and corrosion-resistant fastening, which is particularly advantageous in moist or aggressive environments.

Technology Explained Simply

The IP66 protection rating means the housing is dust-tight and protected against powerful water jets. IP67 additionally guarantees protection against temporary immersion in water, while IP69K ensures protection against hot steam and high-pressure cleaning sprays. These properties make the housing especially suitable for applications in the food industry or chemical production, where regular cleaning cycles are required. The use of plastic as housing material provides good insulation and resistance to chemical influences, while stainless steel screws enhance mechanical stability and corrosion resistance.

Compatibility and Accessories

The M22-I3 is suitable for a wide range of control and signaling devices, including (illuminated) pushbuttons, (illuminated) selector switches, key switches, signal lamps, as well as EMERGENCY STOP and EMERGENCY OFF buttons with yellow labels. It can be combined with various models, such as the M22S-DH-Y illuminated pushbutton (high, yellow), the M22-D-R flush-mounted pushbutton (red), the M225-PV30 STOP/EMERGENCY STOP button, or the M22S-PVL illuminated EMERGENCY OFF button. Compatibility with these devices enables modular expansion of the control unit. Connection to SmartWire-DT is not intended, meaning the housing is not designed for this specific bus technology.

Mounting and Installation

Mounting is done via the integrated stainless steel screws, enabling secure fastening to panels or wall surfaces. The multiple cable entry options (rear, top, side) facilitate cable routing and allow flexible cable arrangement. The mounting positions are designed to accommodate various control devices, with exact placement varying depending on the selected device. Installation does not require special tools, but proper wiring and fastening are necessary to maintain the protection rating.

Advantages in Operation

The housing offers high mechanical stability and is resistant to environmental influences such as moisture, dust, and chemical substances. The multiple entry options and three mounting positions increase flexibility in device selection and arrangement. The use of stainless steel screws ensures long service life, especially in corrosive environments. The protection ratings IP66, IP67, and IP69K ensure reliable operation even under demanding conditions, simplifying maintenance and plant operation. The anthracite-colored design of the housing base ensures unobtrusive integration into industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/920069
qrcode für Moeller 216538 M22-I3 Mounting Enclosure