Eaton 216535, EAN: 4015082165352

Moeller 216535 M22-I1 Mounting Enclosure

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Moeller 216535 M22-I1 Mounting Enclosure

Lieske Part No. 168962
Mfg Part No 216535
EAN-Code 4015082165352
Manufacturer Eaton
Here only 18,14 EUR
21,59 EUR incl. VAT

Further information for Moeller 216535 M22-I1 Mounting Enclosure

General
Housing materialPlastic
Screw materialStainless steel
Installation locations1
Cable entry rear2 x M16
Cable entry top1 x M20
Lateral cable entry2 x M20/M25 (1 x per side)
Degree of protectionIP66, IP67, IP69K
Colour RAL valueRAL 7035
Housing lower section colourAnthracite
Suitable forilluminated pushbuttons, illuminated selector switches, key switches, illuminated indicators, EMERGENCY STOP/EMERGENCY OFF buttons with yellow label
Built-in diameter22,5 mm
Connection to SmartWire-DTNo
The Eaton mounting housing M22-I1 (manufacturer's number 216535) is a robust housing for mounting control and signalling devices in industrial applications. It serves as a base for installing and mounting various operating elements such as pushbuttons, selector switches, key switches, signal lamps, and emergency stop/emergency off buttons with a yellow label. The housing is designed for a single mounting position and allows integration of a device with a diameter of 22.5 mm. It is made of plastic and features stainless steel screws to ensure secure fastening.

Applications

The M22-I1 is designed for use in industrial environments where high mechanical and chemical stresses as well as stringent protection requirements exist. It is particularly suitable for installations in manufacturing, process engineering, or automation technology, where operation requires robust and weather-resistant components. Protection ratings IP66, IP67, and IP69K make the housing suitable for outdoor use or in damp, dusty, or splash-water-prone environments.

Functions and Equipment in Detail

The housing offers multiple cable entry options: two M16 connectors are located at the rear, one M20 connector at the top, and one M20 and one M25 connector on each side. These versatile entry options enable flexible and secure cabling. The lower part of the housing is finished in anthracite, corresponding to RAL 7035, ensuring good visibility and seamless integration into industrial control panels. The use of stainless steel screws ensures corrosion resistance and long service life.

Technology Explained Simply

Protection rating IP66 means the housing is dust-tight and protected against powerful water jets. IP67 additionally provides protection against temporary immersion in water, while IP69K ensures protection against high-pressure and steam jets. These properties make the housing suitable for demanding environments where high cleaning requirements apply. The use of plastic as housing material offers good electrical insulation and resistance to chemical influences.

Compatibility and Accessories

The M22-I1 is compatible with a wide range of control and signalling devices, including (illuminated) pushbuttons, (illuminated) selector switches, key switches, signal lamps, and emergency stop/emergency off buttons with a yellow label. It can be combined with various models, such as the M22S-DR-G-X1 (green pushbutton), M22S-DRLH-Y (yellow illuminated pushbutton), M22S-WS3-SA(*)-* (3-position key switch), or M22-PVLT30 (emergency stop button). Combining these elements allows for individual configuration of control panels.

Mounting and Installation

Mounting is performed using the integrated stainless steel screws, which enable secure fastening to panels or control boards. The cable entries are arranged to allow flexible and orderly cabling. The mounting position is designed for a device with a diameter of 22.5 mm, making installation of standard control devices straightforward.

Operational Advantages

The housing offers high mechanical stability and is protected against environmental influences such as dust, water, and chemical substances. The robust construction and use of stainless steel screws ensure long service life and low maintenance requirements. The various cable entry options simplify installation and maintenance. Compatibility with different control and signalling devices enables flexible use in various application scenarios.

The housing is not intended for connection to SmartWire-DT, meaning it is not suitable for systems using this specific fieldbus technology. The anthracite finish (RAL 7035) provides a neutral and professional appearance that integrates well into industrial environments.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/168962
qrcode für Moeller 216535 M22-I1 Mounting Enclosure