Further information for Moeller 216503 Contact Element 1NO Front
General
Connection system
Screw terminals
Mounting
Front fastening
Contacts
1 breaker contact (NC)
Degree of protection
IP20
Standards
IEC/EN 60947-5-1
Operating force
15 N
Maximum travel
5,7 mm
Operating part travel
4,8 mm
Forced opening
The M22-AK01 contact element from Eaton is an insert component for industrial control and signaling devices, specifically designed for integration into front-mounting systems. It features a screw terminal technology for secure connection of wires and is installed via front mounting into suitable housings or control panels. The element is designed as a normally open contact and is used for signal transmission in control and switching systems, providing a safety function through forced opening in accordance with IEC/EN 60947-5-1. This construction ensures that the contact reliably opens even in the event of mechanical damage or contamination, which is important for safety-critical applications.
Applications
The M22-AK01 contact element is suitable for use in industrial control systems, such as those found in manufacturing automation, machine building, or plant control. It is used in combination with pushbuttons, emergency stop buttons, or other control elements to transmit electrical signals. The front mounting enables easy installation in standard socket or switch housings designed for the M22 series. The protection rating IP20 protects against finger contact and solid foreign objects, but is not suitable for outdoor use or in damp environments.
Functions and Equipment in Detail
The element features a normally open contact (1NO), connected via screw terminals. The terminals allow for a secure and durable connection with cables, with mounting achieved via front adapters. The forced opening function ensures that the contact reliably opens even in the event of mechanical failure or deformation of the control element. This is particularly important in safety-critical systems to avoid false alarms or hazardous conditions. The actuation force is at least 15 N, and the maximum travel of the control element is 5.7 mm, with the travel according to DIN EN 60947-5-1, K.5.4.1, being 4.8 mm.
Technology Explained Simply
Forced opening is a mechanical safety principle in which the contact mechanism is designed to reliably open even if the control element is damaged or deformed. This is achieved through a special guidance of the contact elements that operates independently of the control element. The screw terminals provide a stable electrical connection suitable for industrial applications with high loads. The front mounting allows for quick and secure installation in standard housings of the M22 series.
Compatibility and Accessories
The M22-AK01 contact element is compatible with various control elements of the M22 series, such as pushbuttons, emergency stop buttons, or key switches. It can be combined with products such as the M22-I3-M2 pushbutton 2NO2NC, the M22-D-R-X0/KC11/I pushbutton 1NO1NC flat red, the M22-PV/KC11/IY emergency stop button 1NO1NC, or the M22-WRS/KC11/I key switch 1NO1NC. Use with dust protection caps such as the M22-XKDP is also possible to protect the contacts from contamination. Connection to SmartWire-DT is not intended.
Mounting and Installation
Installation is carried out via front mounting, where the element is inserted into a suitable housing or control panel and secured. The screw terminals are connected to the respective wires, ensuring that the terminals are securely tightened to guarantee a stable electrical connection. The installation position must be chosen so that the actuation travel of 5.7 mm is not obstructed and the required actuation force of at least 15 N can be applied.
Operational Advantages
The M22-AK01 contact element provides reliable and safe signal transmission in industrial systems. The forced opening function increases safety, particularly in systems operating with hazard sources. The screw terminals enable a simple and robust connection that remains stable even under high mechanical loads. Compatibility with the M22 series simplifies integration into existing systems and reduces complexity during installation and maintenance.