Further information for Moeller 216384 M22-CK10 Contact Element 1S Front
General
Standard/approval
UL/CSA, IEC
Construction size
NZM1/2/3/4
Connection system
Cage Clamp
Mounting
Front fastening
Contacts S = Normally open contact
1 S
Degree of protection
IP20
Connection type
Simple contact
Compatible with
NZM1, 2
Connection to SmartWire-DT
The M22-CK10 contact element from Eaton is a front-mounting component for industrial switchgear, used as an auxiliary switch in power circuit breakers of sizes NZM1, NZM2, NZM3, and NZM4. It serves for signal transmission during tripping events and enables the indication of operating states, for example, when a switch has tripped due to overload, short-circuit, earth fault, or current trip. General tripping indication is provided by a plus sign (+), signaling tripping regardless of the cause. The device is designed for use in switchgear compatible with NZM1 and NZM2 sizes.
Applications
The M22-CK10 contact element is used in industrial and commercial electrical installations where visual or electrical feedback on the state of a power circuit breaker is required. It is particularly suitable for applications in manufacturing automation, machine building, and power distribution, where the reliability of signal transmission is critical. Front mounting allows for easy installation directly on the front of the switch, enabling integration into existing systems without additional effort.
Functions and Features in Detail
The component features a normally open contact (1S) that closes when the main switch trips. This contact can be used in control and monitoring systems to trigger alarm signals or indicate the switch position in a higher-level system. The connection technology is based on Cage Clamp technology, enabling quick and secure connections without additional tools. Cage Clamp is a registered trademark of Wago Kontakttechnik GmbH, Germany, and is used here as the standard connection technology.
Technology Explained Simply
The Cage Clamp technology ensures a mechanically stable and electrically reliable connection. The spring-loaded connection securely holds the wire or cable in place without requiring additional screws or crimp connections. The protection rating IP20 means the device is protected against access with fingers or similar objects, but not against dust or water. It is therefore intended for use in enclosed switch cabinets, not for outdoor or damp environments.
Compatibility and Accessories
The contact element is specifically designed for NZM1 and NZM2 sizes, but can also be used with NZM3 and NZM4. It is not intended for connection to SmartWire-DT. Compatible accessories that can be used in combination with the M22-CK10 include various pushbuttons, selector switches, key switches, and joysticks from the M22 series, for example, the M22S-WRS3 key switch with 3 positions or the M22-WRLK3-G illuminated selector switch with 3 positions, green. These components can be integrated into a common control panel to realize complex control functions.
Mounting and Installation
Installation is performed via front mounting, attaching the component directly to the front of the power circuit breaker. The Cage Clamp technology allows for quick, tool-free connection of wires. It is important to ensure that connection screws or terminals are properly tightened to guarantee a reliable electrical connection. Installation follows standard procedures for industrial switchgear, adhering to electrical regulations and safety requirements.
Operational Advantages
The M22-CK10 contact element provides reliable and maintenance-friendly signal transmission. The Cage Clamp technology reduces installation time and minimizes wiring errors. Front mounting enables quick integration into existing systems. The IP20 protection rating ensures operational safety in enclosed switch cabinets. Compatibility with various sizes and the ability to combine with other M22 components increases flexibility in system design.