Further information for Moeller 216379 M22-K01-GVP contact element 1NO front
General
Connection system
Screw terminals
Mounting
Front fastening
Contacts Normally closed (NC)
1 Ö
Norm
IEC/EN 60947-5-1
Degree of protection
IP20
Operating force
15 N
Actuation stroke
4,8 mm
Maximum travel
5,7 mm
Connection type
Simple contact
Forced opening
Connection to SmartWire-DT
The M22-K01-GVP contact element from Eaton is an insert component for industrial control and signaling devices, specifically designed for integration into control systems. It functions as an electrical switch with a normally open (1O) contact and is connected via screw terminals. Front mounting allows for easy installation in standard control enclosures or on control panels. The device is designed for use in systems with safety requirements, as it features a forced opening function in accordance with IEC/EN 60947-5-1, ensuring safe separation of contacts even in the event of mechanical failure.
Applications
This contact element is intended for use in industrial control and automation systems, particularly in applications requiring safety-critical functions. It is commonly used in combination with pushbuttons or other control elements to electrically transmit states such as operational readiness, faults, or shutdown. The protection rating IP20 safeguards against contact with fingers and larger solid objects, but is not suitable for outdoor use or in damp environments.
Functions and Features in Detail
The component features a single-pole contact with a normally open (1O) function, connected via screw terminals. The contacts are designed to enable forced opening in accordance with IEC/EN 60947-5-1, meaning the contacts will safely disconnect even if the actuator part fails mechanically. This is particularly important in safety-critical applications to prevent unintended power supply. The actuation force is at least 15 N, and the actuator travel is 4.8 mm, with a maximum travel of 5.7 mm. These values comply with the requirements of DIN EN 60947-5-1, section K.5.4.1.
Technical Explanation
The forced opening function ensures that the contact opens even if the actuator is damaged or jammed. This prevents a switch from remaining erroneously in the on position, which could pose a hazard in safety-critical systems. The screw terminals provide a secure and durable connection to wiring, which is subjected to high mechanical and electrical stresses in industrial operation. The IP20 protection rating prevents direct contact with fingers and larger objects, but does not provide waterproofing or dustproofing.
Compatibility and Accessories
The contact element is compatible with various M22 series pushbuttons from Eaton, such as the M22-I3-M1 (2S2O configuration) or the M22-I3-M2 (2S2O configuration with LED). It can also be combined with the dust cap M22-XKDP to protect the contacts from contamination, especially when the device is not in continuous operation. Connection is made via screw terminals, ensuring a secure electrical connection.
Mounting and Installation
Mounting is done via front mounting, inserting the component into a suitable control enclosure or control panel. The screw terminals allow for easy and secure connection to wiring. Adhering to the specified actuation force (minimum 15 N) and actuation travel (4.8 mm) is essential to ensure the forced opening function operates correctly. Installation must follow the requirements of the IEC 60947-5-1 standard.
Operational Advantages
The forced opening function enhances safety in industrial systems by ensuring safe contact separation even in the event of mechanical failure. The screw terminals provide a robust and reliable connection that withstands industrial conditions. Compatibility with other M22 components allows for flexible design of control panels and control systems.