Eaton 216376, EAN: 4015082163761

Moeller 216376 M22-K10 Contact Element 1S Front

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Moeller 216376 M22-K10 Contact Element 1S Front

Lieske Part No. 772793
Mfg Part No 216376
EAN-Code 4015082163761
Manufacturer Eaton
Here only 6,70 EUR
7,97 EUR incl. VAT

Further information for Moeller 216376 M22-K10 Contact Element 1S Front

General
Standard/approvalUL/CSA, IEC
Construction sizeNZM1/2/3/4
Connection systemScrew terminals
MountingFront fastening
Contacts S = Normally open contact1 S
Degree of protectionIP20
Connection typeSimple contact
Description of auxiliary switch HIAGeneral trip indication '+', if tripped by overload trip unit, short-circuit trip unit, or residual current trip unit due to fault current
Compatible withNZM1, 2, 3 circuit breakers
Connection to SmartWire-DTNo
The M22-K10 contact element from Eaton is an insertable contact element for power circuit breakers of sizes NZM1, NZM2, NZM3, and NZM4. It functions as a tripped auxiliary switch (HIA) and enables visual or electrical indication when a power circuit breaker has been tripped by a current trip unit, overload trip unit, short-circuit trip unit, or earth fault trip unit. The indication is provided via a general signal “+”, which signals the tripping cause regardless of the specific trip type. The element is directly inserted into the power circuit breaker and is designed for front mounting.

Applications
This contact element is intended for use in industrial and commercial electrical installations where reliable feedback on the tripping status of a power circuit breaker is required. It is used in switchgear, machine controls, and distribution systems to support operational safety and maintenance. Use is exclusively in combination with power circuit breakers of sizes NZM1, NZM2, NZM3, and NZM4.

Functions and Equipment in Detail
The M22-K10 features a single contact with one normally open contact (1S). When the power circuit breaker trips, the contact closes, enabling the activation of an external indicator, such as an LED or relay. The connection terminals are designed as screw terminals, ensuring a secure and mechanically stable connection. Mounting is performed on the front side of the power circuit breaker, integrating it directly into the switch.

Technology Explained Simply
The contact element operates as an auxiliary switch functioning in parallel with the main tripping mechanism of the power circuit breaker. When the switch trips, the contact closes, enabling electrical signal transmission. The protection rating IP20 means the device is protected against access with fingers and against solid foreign objects, but not against water or dust. It is therefore suitable for use in enclosed enclosures, but not for outdoor use or in damp environments.

Compatibility and Accessories
The M22-K10 is specifically designed for power circuit breakers of sizes NZM1, NZM2, NZM3, and NZM4. It is not compatible with SmartWire-DT. Suitable accessories that can be used in combination with this contact element include various pushbuttons, selector switches, illuminated pushbuttons, and joysticks from the M22 series, such as the M22S-WR3-X94 selector switch 3 positions labeled, the M22-WLK3-W illuminated selector switch 3 positions white, or the M22S-WRJ2H joystick 2 positions latching horizontal black. These components can be integrated into control panels or operator interfaces to enhance operation and indication.

Mounting and Installation
Installation is performed by inserting the contact element into the designated socket of the power circuit breaker. Front mounting allows for secure and quick installation without additional fastening components. The screw terminals are connected to the respective wires, with electrical connections to be made in accordance with applicable standards and regulations. Installation is carried out within an enclosed enclosure, as the IP20 protection rating does not permit use outdoors or in damp areas.

Operational Advantages
The M22-K10 contact element provides clear and reliable feedback on the tripping status of the power circuit breaker. Integration into the switch reduces the number of external components and simplifies the control system. The use of a normally open contact enables activation of indicators or controls, facilitating maintenance and fault diagnosis. Certifications according to UL/CSA and IEC ensure compliance with international safety and quality standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/772793
qrcode für Moeller 216376 M22-K10 Contact Element 1S Front