| General |
| Manufacturer | Eaton |
| Product type | Auxiliary contactor |
| Application | auxiliary contactor |
| Assortment | DILA relays |
| Connection system | Push-in terminals |
| Actuation voltage | 230 V |
| Frequency | 50/60 Hz |
| Type of current | AC operation |
| Degree of protection | IP20 |
| Rated operational current AC-15 | 4 A |
| Voltage range AC-15 | 220–240 V; 380–415 V |
| Contacts Normally open (NO) | 3 S |
| Contacts Normally closed (NC) | 1 O |
| Identification number | 31E |
| Combinable with | DILA-XHI(V).-PI |
| Contact numbers | according to EN 50011 |
| Coil terminal markings | in accordance with EN 50005 |
This product is an auxiliary contactor from the DILA series by Eaton, type DILA-31(230V50/60HZ)-PI, designed for use in industrial control and switching systems. It serves as a base unit with positive operating contacts and is actuated by an AC coil rated at 230 V at 50/60 Hz. The connection technology uses push-in terminals, enabling quick and secure wiring. The device is designed for use in switching systems with a protection rating of IP20, providing protection against finger contact and solid foreign objects up to 12.5 mm in diameter. Contact numbering follows the EN 50011 standard, and coil terminal markings comply with EN 50005.
Applications
This auxiliary contactor is used in industrial systems for controlling auxiliary functions such as signal transmission, status indication, or logic control. It is suitable for applications requiring electrical interlocking or signal transmission systems, for example in machine controls, plant automation, or in conjunction with other contactors and relays. The operating voltage of 230 V AC makes it compatible with standard low-voltage networks in industrial environments.
Functions and Features in Detail
The device features three normally open contacts (3 S) and one normally closed contact (1 Ö), enabling flexible integration into circuit diagrams. Rated operational currents are 4 A for voltage ranges of 220 V to 240 V and 380 V to 415 V, according to switching duty AC-15. The contacts are designed for operation in switching systems with normal loads. The push-in terminals allow for quick and tool-free wire connections, reducing installation time. The identification number 31E denotes the specific configuration within the DILA series.
Technical Explanation
The coil of the auxiliary contactor is operated with 230 V AC, generating a magnetic field that pulls the armature and switches the contacts. The contacts close or open according to the switching function—here, three normally open and one normally closed contact are provided. The IP20 protection rating means the device is not suitable for outdoor or damp environments, but intended for use in enclosed control cabinets. Compliance with standards EN 50011 and EN 50005 ensures uniform marking of contacts and coil terminals, simplifying planning and maintenance.
Compatibility and Accessories
The auxiliary contactor can be combined with auxiliary switch modules from the DILA-XHI(V).-PI series, allowing expansion of the contact configuration. Available modules include auxiliary switch units with 2 or 4 poles and a thermal current rating of 16 A. These modules can be used to extend switching functions, such as adding additional normally open or normally closed contacts.
Mounting and Installation
Mounting is performed in standard control cabinets or on rails, with push-in terminals enabling simple and secure wire connections. The coil is connected to the 230 V AC power supply, and the contacts are wired according to the circuit diagram to loads or signals. Compliance with EN 50011 and EN 50005 ensures clear assignment of terminals. The IP20 protection rating requires installation in a closed, dry control cabinet.
Operational Advantages
The use of push-in terminals reduces installation time and minimizes wiring errors. Clear contact marking according to EN 50011 and coil terminal marking according to EN 50005 facilitate planning, installation, and maintenance. Compatibility with auxiliary switch modules allows flexible function expansion without replacing the base unit. The rating for 4 A across various voltage ranges makes the device suitable for a wide range of applications.