Further information for Moeller 180796 M22-FLED-B LED element blue
General
Mounting
Front fastening
Connection system
Cage Clamp
Rated operating voltage
12 - 30 V AC/DC
Standard operating voltage
24 V AC/DC
Rated operation current
5 - 15 mA
Power consumption
0,26 W
Degree of protection
IP20
Standards and regulations
IEC 60947-5-1
Connection to SmartWire-DT
The LED element M22-FLED-B from Eaton is an insert indicator for industrial control and operating systems. It serves as a visual signal indicator in enclosures and control panels and is integrated via front mounting into suitable housings or control boards. The device is designed for use in electrical installations with an operating voltage range of 12 to 30 V AC/DC (standard 24 V AC/DC). The connection technology uses Cage Clamp, a system for quick and secure connection of wires developed by Wago Kontakttechnik GmbH. The maximum power consumption is 0.26 W at 24 V operating voltage, with an operating current between 5 and 15 mA. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, but not against splashing water or dust – thus, the device is intended for use in enclosed indoor environments.
Applications
The LED element M22-FLED-B is suitable for use in industrial control systems, such as in automation systems, machine controls, or process monitoring systems. It serves as a status indicator for operating conditions, fault messages, or operational readiness. The blue color enables clear optical differentiation from other signals in a control panel. The front mounting allows for easy installation in standard socket outlets or control boards with matching mounting slots.
Functions and Equipment in Detail
The device is designed as an LED element activated by an electrical voltage. The indicator lights up when the operating voltage is applied and signals the respective status. The Cage Clamp connection terminal enables a quick and reliable connection without additional tools. The rated operating voltage of 12 to 30 V AC/DC (standard 24 V AC/DC) makes the element compatible with common control systems in industry. The operating frequency is 50/60 Hz, enabling use in networks with standard frequency. The maximum power consumption of 0.26 W at 24 V is low and contributes to energy efficiency.
Technology Explained Simply
LED technology ensures a clear, energy-efficient light indication. The blue color is commonly used for signaling operating conditions or system readiness. The IP20 protection rating means the device is protected against contact with fingers and against the ingress of solid foreign objects larger than 12.5 mm. However, it is not waterproof and not suitable for outdoor use or in damp environments. The Cage Clamp connection technology allows for quick and secure wire connections without requiring additional tools. The connection is secured by inserting the cable into the terminal and actuating a lever mechanism.
Compatibility and Accessories
The LED element M22-FLED-B is part of Eaton’s M22 series and can be combined with other components of this series, such as illuminated pushbuttons, key switches, or illuminated indicators in Flat Front design. Compatible products include, for example, M30C-FDL-X illuminated pushbuttons, M30I-FL-Y illuminated indicators in yellow, or M30C-FL-W illuminated indicators in white. These elements enable the creation of consistent control panels with uniform design. Connection to SmartWire-DT is not provided, so the element cannot be integrated into systems using this specific fieldbus technology.
Mounting and Installation
Mounting is performed via front mounting, inserting the LED element into a suitable mounting slot or control board. The Cage Clamp connection terminal is connected directly to the wire, secured by a lever mechanism. Installation requires no additional tools, as the Cage Clamp technology enables quick and secure connections. The electrical connection is made via designated connection points designed for an operating voltage of 12 to 30 V AC/DC.
Operational Advantages
The LED element M22-FLED-B provides a clear, energy-efficient signal indication with low power consumption. The front mounting and Cage Clamp technology enable quick and reliable installation. The IP20 protection rating ensures sufficient protection for use in enclosed indoor environments. Compatibility with other M22 elements allows for the creation of uniform control panels. The blue color supports optical differentiation of signals in complex systems.
Standards and Regulations
The device complies with standard IEC 60947-5-1, which defines requirements for electrical switches and switching devices for use in industrial control systems. This standard ensures the reliability and safety of the device in industrial applications.