Eaton 110835, EAN: 4015081103669

Moeller 110835 M22-K10P contact element 1fS

Industrial Material > Control devices / Pilot devices > Motor protection switch

Moeller 110835 M22-K10P contact element 1fS

Lieske Part No. 358625
Mfg Part No 110835
EAN-Code 4015081103669
Manufacturer Eaton
Here only 135,09 EUR
160,76 EUR incl. VAT

Further information for Moeller 110835 M22-K10P contact element 1fS

General
Connection systemScrew terminals
MountingFront fastening
Contacts S = Normally open contact1 S
Degree of protectionIP20
Connection typeSimple contact
Standards and regulationsIEC 60947-5-1
Connection to SmartWire-DTNo
The M22-K10P contact element from Eaton is an industrial component for signal transmission in control and switching installations. It functions as a single-pole make contact (1S) and is connected via screw terminals. Front mounting enables easy installation in control panels or control cabinets. The device is designed for use in electrical installations, where it serves as an auxiliary contact in conjunction with other control or signaling devices. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust – it is therefore intended for indoor use only.

Applications

The M22-K10P contact element is typically used in industrial control systems, where it serves as an auxiliary contact for motor protection switches, pushbuttons, or other control devices. It transmits switching states, for example, the operating status of a motor or the position of a switch, to a higher-level control system. Due to the IP20 protection rating, it is suitable exclusively for use in enclosed, dry indoor environments, not for outdoor installations or humid conditions.

Functions and Features in Detail

The device features a single make contact (1S), which closes the electrical circuit when the connected device (e.g., a pushbutton or motor protection switch) is actuated. Connection is made via screw terminals, ensuring a secure and mechanically stable connection. Front mounting allows for quick and tool-free installation in standard control panels. The contact element is not designed for connection to SmartWire-DT, meaning it does not have integrated communication functionality via this bus technology.

Technology Explained Simply

A contact element like the M22-K10P functions as a mechanical switch that closes an electrical contact when another device (e.g., a pushbutton) is actuated. The screw terminals allow for a secure connection to wires used for signal transmission. The IP20 protection rating means the device is protected against contact with fingers and against the ingress of solid foreign objects larger than 12.5 mm, but not against water or dust. This makes it suitable for dry indoor environments, but not for humid or dusty conditions.

Compatibility and Accessories

The M22-K10P contact element is compatible with various control and signaling devices from Eaton’s M22 series, such as pushbuttons, key switches, or emergency stop buttons. It can be combined, for example, with the M22-I3-M2 pushbutton 2S2NC, the M22-TC telescopic clip, or the M22-PV/KC02/IY emergency stop button. These devices enable modular expansion of control systems, with the contact element handling signal transmission. The use of telescopic clips (e.g., M22-TC) simplifies mounting and replacement of components.

Mounting and Installation

Mounting is done via front mounting into a suitable control panel or control cabinet. The screw terminals are connected to the corresponding wires, with electrical connection values to be observed according to standards and regulations. Installation does not require special tools, but proper wiring in accordance with applicable regulations is mandatory. The device is not intended for use in hazardous explosive areas.

Operational Advantages

The M22-K10P contact element provides reliable and mechanically stable signal transmission in industrial installations. Front mounting and screw terminals simplify installation and maintenance. Compatibility with Eaton’s M22 series enables flexible expansion of control systems. Compliance with the IEC 60947-5-1 standard ensures electrical safety and reliability of the device in industrial applications.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/358625
qrcode für Moeller 110835 M22-K10P contact element 1fS