Further information for Moeller 106785 LS-S11/L position switch 1S1Ö roller lever
General
Degree of protection
IP66, IP67
Ambient temperature
-25 - +70 °C
Construction type
EN 50047 Form E
Contacts
1 make contact (NO), 1 breaker contact (NC)
Connection type
Screwed terminal
Housing material
Plastic
Colour of housing cover
Yellow
Standards and regulations
IEC/EN 60947
Manufacturer
Eaton
Assortment
Roller lever
Basic function
Position switch, safety position switch
Features
Complete device
Forced opening
The Eaton position switch type LS-S11/L is a mechanical end switch for industrial applications, designed as a safety position switch with forced opening function. It is used for mechanical position detection in machines and plants, particularly in environments with high requirements for protection rating and operational safety. The device features a roller lever as the actuation mechanism and is supplied as a complete unit, allowing direct integration into existing control systems. The design conforms to standard EN 50047 form E, enabling standardized mounting and placement in control panels.
Applications
This position switch is intended for use in industrial machines, plants, and automation systems, especially in areas where safe position detection is required. The protection rating IP66 and IP67 makes it suitable for outdoor use as well as in environments with high demands for dust and splash water protection. The operating temperature range of -25 °C to +70 °C allows use in diverse climatic conditions, from cold production halls to warm industrial facilities.
Functions and Equipment in Detail
The switch features one normally closed contact (1 S) and one normally open contact (1 Ö), with connections made via screw terminals. The housing cover is yellow, enabling visual identification. As a safety position switch, it is equipped with forced opening according to IEC/EN 60947-5-1, meaning the contacts will safely open even in the event of mechanical failure or damage to the lever, ensuring safe disconnection. The housing is made of plastic, providing high mechanical stability with low weight.
Technical Explanation
The forced opening function ensures that the switch is forced into the open position even if the lever is mechanically damaged or deformed. This is critical for safety in machine control systems, as it prevents a defective switch from falsely signaling a position as occupied. The protection rating IP66 and IP67 means the device is dust-tight and protected against splashing water from all directions, making it suitable for use in damp or dusty environments.
Compatibility and Accessories
Various accessories are available for this switch to facilitate installation and integration. These include, for example, the M12A5 connector socket 5p M12 A-coded, the LS-X20 screw cap transparent M20 IP65, the LS-XAP adapter plate LS-Titan, the M12B mounting plug M12 B-coded, the EMS20 membrane screw M20, the M12A M12 plug M20 IP65, and the FS-AT guide washer for AT... These components enable flexible and secure cabling as well as precise mounting in various control panels or machine constructions.
Mounting and Installation
Mounting is performed according to the design standard EN 50047 form E, allowing standardized fixation in control panels. The screw terminals allow for easy and secure connection of wires. The yellow color of the housing cover supports visual identification of the switch during operation. Mounting can be done without additional tools, provided the designated mounting elements are used.
Operational Advantages
The use of the Eaton LS-S11/L provides high operational safety due to the forced opening function, which ensures safe disconnection even in case of mechanical failure. The robust plastic construction and high protection ratings IP66/IP67 ensure long service life even in demanding environments. The clear identification via the yellow cover color simplifies maintenance and inspection. Compatibility with various accessories allows flexible adaptation to different requirements.