| General |
| Application | Contactor for lighting systems |
| Utility category | AC-1 |
| Rated operation current | 27 A |
| Voltage | 380 V / 400 V |
| Thermal current | 45 A |
| Actuation voltage | 230 V 50 Hz, 240 V 60 Hz |
| Number of poles | 3-pole |
| Frequency range | 50 - 60 Hz |
| Degree of protection | IP00 |
| Standards and regulations | IEC/EN 60947, VDE 0660, UL, CSA |
The product is a lamp load contactor of the brand Eaton, type DILL20(230V50HZ,240V60HZ), with manufacturer number 104408. It is specifically designed for use in lighting systems and serves as a safe switching and protection function for non-inductive or slightly inductive loads, such as those occurring with lamps and resistance furnaces. The device is designed as a 3-pole contactor and operates in the frequency range of 50 to 60 Hz. The control voltage is 230 V at 50 Hz and 240 V at 60 Hz, enabling adaptation to various power supply systems.
Applications
This contactor is intended for use in industrial and commercial lighting systems, particularly in environments with high switching cycles and thermal loads. It is suitable for applications with lamp loads that require a specific switching characteristic to extend the service life of lighting components and optimize switching operations. The AC-1 category defines use for non-inductive or slightly inductive loads, including applications in resistance furnaces and similar systems.
Functions and Equipment in Detail
The contactor has a rated operational current (Ie) of 27 A at a voltage of 380 V or 400 V. At an ambient temperature of 40 °C, the conventional thermal current (Ith) is 45 A, describing the thermal load capacity of the device under normal operating conditions. The switching function is performed via an electromagnetic coil operated at the specified control voltage. The construction is designed for high switching endurance to meet the requirements of lighting systems.
Technology Explained Simply
The term
lamp load contactor describes a specialized contactor designed for the specific characteristics of lamp loads, particularly high inrush currents and thermal stresses during frequent switching operations. The
usage category AC-1 refers to loads with no or only slight inductance, such as heating resistors or incandescent lamps. The
protection rating IP00 means the device offers no mechanical or weather protection and must therefore only be used in protected indoor environments.
Compatibility and Accessories
Various accessories are available for this contactor to extend its functionality. These include replacement coils for different control voltages (e.g., DILM32-XSP for AC voltages or DILM32-XSP(RDC24) for DC operation), varistors for surge protection (e.g., DILM32-XSPV48), time modules for delayed switching operations (e.g., DILM32-XTED11-10 for delayed release functions), and auxiliary switches (e.g., DILA-XHI40) for additional control and signaling functions. These components can be mounted additionally depending on the application to realize specific switching logic or safety functions.
Mounting and Installation
Mounting is carried out in the usual manner for contactors in enclosures or distribution boards. The terminals are designed for connection to cables matching the respective current and voltage requirements. Installation requires compliance with applicable standards and regulations, particularly IEC/EN 60947, VDE 0660, UL, and CSA, which are mentioned in the product. The protection rating IP00 requires installation in a protected indoor environment, as the device is not protected against dust, water, or mechanical impacts.
Operational Advantages
The contactor provides reliable switching performance for lighting systems with high switching cycles. The special design for lamp loads minimizes thermal stress and extends the service life of lighting components. The high thermal load capacity (Ith = 45 A at 40 °C) allows flexible use in various environments. Compatibility with various accessories enables adaptation to specific requirements without impairing the basic function.