| General |
| Degree of protection | IP65 Front |
| Construction type | rear mounting |
| Switching angle | 90 ° |
| Rated operating power | 5,5 kW |
| Operating voltage | 400 V |
| Frequency | 50 - 60 Hz |
| Rated continuous current | 20 A |
| Number of poles | 2 way |
| Stop function | EMERGENCY STOP function |
| Locking | lockable in position 0 (off) |
| Type identifier | T0 |
| Standards | IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, UL |
| Type of device | Disconnect switch |
The main switch T0-1-102/V/SVB from Eaton is a 2-pole switch disconnector for rear mounting in electrical installations. It serves as a safety and operational control device in industrial and commercial applications, particularly as a maintenance or repair switch. The switch features an emergency stop function, visually indicated by a red rotary handle and a yellow locking ring. Position 0 (Off) is lockable, ensuring safe disconnection and preventing unintended re-energization. The front side of the device is rated IP65, enabling dust-tight and splash-proof conditions, even in outdoor or damp environments.
Applications
The switch is intended for use in machine and plant engineering, manufacturing technology, and electrical installations. It is particularly suitable for systems where safe disconnection and clear indication of operational status are required. The rated operational power is 5.5 kW at 400 V and 50–60 Hz (AC-23A), making it suitable for medium electrical loads. The rated continuous current of 20 A allows operation with appropriately sized conductors and switching devices.
Functions and Equipment in Detail
The switch operates with a switching angle of 90°, ensuring clear and precise actuation. The emergency stop function is implemented via the red rotary handle, which can be moved to position 0 (Off) and locked there. The yellow locking ring serves as a visual indicator and enhances recognizability during operation. The lock in the Off position prevents accidental re-energization, which is especially important during maintenance work.
Technology Explained Simply
The switch is designed as a switch disconnector in accordance with IEC/EN 60947-3, meaning it is intended for disconnecting electrical loads and ensuring a free contact in the off state. The IP65 protection rating on the front side protects against dust and splashing water, making it suitable for environments with higher ambient requirements. The rear-mounting design requires installation in an enclosure or control cabinet, with the front side remaining accessible.
Compatibility and Accessories
Various accessories are available to extend functionality and adapt to specific requirements. These include shaft extensions such as ZAV-P3 or ZAV-T0, which improve handle accessibility. Cylinder lock locks such as SVA(*)-SOND-SA(*)-T3 or SVA-SOND-KMS(*)-T3, as well as padlock locks such as SVB-SW-T0, allow additional mechanical locking. Insulating housing units such as CI-K2-T0-2-NA or CI-K1H-T0-4 can be used for electrical insulation and protection against contact. Additionally, front plates such as ZFS61/62-T0 (German/English) or FS-ALU980-T0 are available to facilitate operation. Mounting aids such as MBS-I2 or mounting brackets AB-CI-K4/5 support installation. Combining with central mounting kits such as EZ-T0 enables integrated installation in existing control systems.
Mounting and Installation
The switch is mounted rearward into a suitable enclosure or control cabinet. Installation is carried out via the designated mounting points, with electrical connections made at the rear. The front side remains accessible to operate the rotary handle. The lock in the Off position requires attention to mechanical requirements during installation, especially when using additional locking devices.
Advantages in Operation
The switch provides clear indication of operational status through the color and shape of the handle. The lock in the Off position increases safety during maintenance. The IP65 protection rating ensures high environmental resistance. Compliance with standards IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, and UL guarantees conformity with international safety and quality requirements. The rated values of 20 A and 5.5 kW at 400 V enable broad application in industrial systems.
Standards and Regulations
The switch complies with standards IEC/EN 60947, VDE 0660, IEC/EN 60204, CSA, and UL. Conformity with IEC/EN 60947-3 confirms suitability as a switch disconnector. These standards ensure electrical safety, operational reliability, and device dependability in industrial environments.