Eaton 090401, EAN: 4015080904014

Moeller 090401 E01 Contact Element 1 NO

Industrial Material > Control devices / Pilot devices > Built-Command and signaling devices

Moeller 090401 E01 Contact Element 1 NO

Lieske Part No. 449224
Mfg Part No 090401
EAN-Code 4015080904014
Manufacturer Eaton
Here only 6,76 EUR
8,04 EUR incl. VAT

Further information for Moeller 090401 E01 Contact Element 1 NO

General
Degree of protectionIP20 with ISH2,8
Operating voltage5 - 250 V
Connection systemFlat plug-in connection
Contact configuration1 breaker contact (NC)
Safety functionforced opening according to IEC/EN 60947-5-1
Connection to SmartWire-DTNo
The E01 contact element from Eaton, manufacturer's number 090401, is a single device for supplementary equipment in command and signaling devices for industrial use. It functions as an electrical switch with one normally open contact and is designed for integration into control systems, particularly in installations requiring safe disconnection. The device features flat pin connection technology, enabling quick and secure mounting in standard connectors. The contact configuration includes one normally open contact (1 Oe), which, according to IEC/EN 60947-5-1, provides a safety function through forced opening. This design ensures that the contact safely opens even in the event of mechanical failure or damage to the housing, preventing uncontrolled current flow.

Contact element
This device is designed as a contact element to be integrated into existing control systems to enable additional functions such as status indication, disconnection, or signal initiation. It is not intended for direct operator actuation but is used in conjunction with other command or signaling devices, for example, with switching elements or key switches. The contact configuration with one normally open contact (1 Oe) allows control of relays, indicators, or other electrical loads. The forced opening feature in accordance with IEC/EN 60947-5-1 ensures that the contact safely opens even if mechanically impaired, which is crucial for safety-critical applications.

Applications
The E01 contact element is suitable for use in industrial control and automation systems, particularly in installations requiring safe disconnection or status monitoring. Typical applications include machine controls, systems with emergency stop functions, or systems where monitoring of operator controls is necessary. The permissible operating voltage of 5 to 250 V makes it suitable for a wide range of applications in low-voltage technology. The protection rating IP20 with ISH2,8 protects against finger contact and ingress of solid foreign objects, but not against water or dust, which requires indoor installation under normal environmental conditions.

Technology explained simply
The flat pin connection technology enables simple and reliable connection in standard connectors commonly used in industrial electrical engineering. The contact configuration with one normally open contact (1 Oe) means that the contact is open in the resting state and closes when the connected device (e.g., a key switch) is actuated. The forced opening feature according to IEC/EN 60947-5-1 is a safety function ensuring that the contact safely opens even in the event of mechanical failure or damage to the housing, preventing uncontrolled current flow. The protection rating IP20 with ISH2,8 protects against finger contact and ingress of solid foreign objects, but not against water or dust, which requires indoor installation under normal environmental conditions.

Compatibility and accessories
The E01 contact element is compatible with various command and signaling devices from Eaton, particularly with switching elements such as the 3SB2404-0C (1 normally open contact) and key switches such as the Q18S1R (2 positions). These devices can be combined with the contact element to achieve extended functions such as status indication, disconnection, or signal initiation. Connection to SmartWire-DT is not possible, meaning the device cannot be integrated into systems using this specific fieldbus technology. The combination with the mentioned accessories allows flexible adaptation to different requirements in industrial control technology.

Mounting and installation
Mounting is performed via flat pin connection technology, enabling quick and secure connection in standard connectors. Installation requires no special tools or additional effort, as the device is simply inserted into the designated sockets. Electrical connection is made via the terminal clamps, designed for an operating voltage of 5 to 250 V. The protection rating IP20 with ISH2,8 requires indoor installation under normal environmental conditions, with the mechanical integrity of the housing ensured to maintain the safety function of forced opening.

Advantages in operation
The E01 contact element provides reliable and safe operation in industrial control systems. The forced opening feature according to IEC/EN 60947-5-1 ensures safe disconnection even in the event of mechanical failure, which is important for safety-critical applications. The flat pin connection technology enables quick and easy installation, reducing installation time. Compatibility with various command and signaling devices from Eaton offers flexibility in system design. The permissible operating voltage of 5 to 250 V makes the device suitable for a wide range of applications in low-voltage technology. The protection rating IP20 with ISH2,8 protects against finger contact and ingress of solid foreign objects, but not against water or dust, which requires indoor installation under normal environmental conditions.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/449224
qrcode für Moeller 090401 E01 Contact Element 1 NO