Eaton 073146, EAN: 4015080731467

Moeller 073146 U-PKZ0(240V60HZ) undervoltage release instantaneous

Industrial Material > Control devices / Pilot devices > Breakers and disconnectors

Moeller 073146 U-PKZ0(240V60HZ) undervoltage release instantaneous

Lieske Part No. 192737
Mfg Part No 073146
EAN-Code 4015080731467
Manufacturer Eaton
Here only 47,48 EUR
56,50 EUR incl. VAT

Further information for Moeller 073146 U-PKZ0(240V60HZ) undervoltage release instantaneous

General
Degree of protectionUndelayed
Operating voltage240 V
Frequency60 Hz
Compatibilitypower switch size PKZ(M)0
ManufacturerEaton
The undervoltage release U-PKZ0(240V60HZ) from Eaton is a specific accessory for circuit breakers of size PKZ(M)0. It enables automatic disconnection of the switch when the operating voltage drops below a predefined threshold, thereby protecting electrical devices and systems from damage caused by insufficient voltage. The device is designed as an instantaneous unit, meaning the tripping action occurs immediately upon undervoltage, without any time delay. This is particularly required in systems that need constant voltage supply to operate safely and reliably.

Applications

The undervoltage release is used in industrial and commercial electrical installations where power supply reliability is critical. It is suitable for applications in manufacturing technology, building automation, or systems with sensitive electrical loads that could be damaged during voltage dips. Its use is exclusively in conjunction with circuit breakers of size PKZ(M)0, which are typically mounted in enclosures or distribution boards.

Functions and Features in Detail

The release responds to a voltage below 240 V at a frequency of 60 Hz. When this threshold is undershot, the switch is automatically opened to disconnect the load from the network. The instantaneous tripping ensures a rapid response, which is essential for its protective function. Its installation is limited to circuit breakers of size PKZ(M)0, meaning it can only be used in switches of this specific design. The function is purely electrical and requires no additional adjustments or settings on the device itself.

Technology Explained Simply

The undervoltage release operates on an electromechanical principle. At sufficient voltage, a magnetic field remains active, holding the tripping mechanism in the switched-on position. When the voltage drops below the threshold, the magnetic field loses its strength, releasing the tripping mechanism and causing the switch to open automatically. The operating voltage of 240 V at 60 Hz is typical for installations in North America, where this frequency and voltage level are standardized. The instantaneous tripping ensures no delay occurs between voltage drop and disconnection.

Compatibility and Accessories

The undervoltage release is specifically designed for circuit breakers of size PKZ(M)0. Compatible switch models include, for example, types PKZM4-16-CB, PKZM4-25-CB, and PKZM4-32-CB, also offered by Eaton. These switches are rated for currents between 10 and 32 amperes and are designed for use in North America. Combining the undervoltage release with these switches enables full protective functionality in electrical systems. There are no additional specific accessories directly associated with this release.

Mounting and Installation

Installation is performed directly onto the circuit breaker of size PKZ(M)0. The release is inserted into the switch housing and mechanically secured, requiring no additional tools or modifications. Electrical connections are made via integrated terminal clamps, which are connected to the corresponding wires. Installation takes place within a closed enclosure or distribution board, where the overall system’s protection rating must account for environmental conditions.

Operational Advantages

Using the undervoltage release enhances the safety and reliability of electrical systems. Automatic disconnection during voltage dips prevents sensitive equipment or machinery from being damaged. The instantaneous response ensures disconnection occurs immediately when voltage falls below the threshold. This is especially important in systems that must not be interrupted to avoid damage or production downtime. Compatibility with the specified switch types allows for easy integration into existing systems.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/192737
qrcode für Moeller 073146 U-PKZ0(240V60HZ) undervoltage release instantaneous