Further information for Moeller 072739 Motor Protection Switch 3-pole manual
General
Degree of protection
IP20
Rated operating voltage
690 V
Number of poles
3
Rated current range
6,3-10 A
Construction size
PKZM0
Built-in size
45 mm
Mounting method
screw and snap mounting
Terminal technology
Screw terminals
Finger protection
according to VDE 0106 T. 100
Norm
IEC/EN60947
Phase failure sensitivity
The PKZM0-10 motor protection switch from Eaton is a 3-pole protection switch in size PKZM0, designed for use in industrial applications for protecting electric motors. It complies with IEC/EN60947 standards and is rated for an operating voltage Ue up to 690 V. The switch features adjustable overload and instantaneous short-circuit tripping units, providing protection against both thermal overload and sudden short circuits. It is phase-loss sensitive, meaning it reacts to the failure of a phase in a three-phase power system and disconnects the motor to prevent damage.
Applications
The PKZM0-10 is suitable for use in industrial applications, particularly in drive technology where motor protection is required. It is commonly used in conjunction with three-phase motors operating in production plants, conveyor systems, or pump systems. The protection class IP20 ensures protection against contact with fingers and against solid foreign objects, although it is not intended for outdoor use or in damp environments. The mounting dimensions are 45 mm, making it suitable for standard control panels.
Functions and Equipment in Detail
The switch is manually operated and allows both screw and snap mounting, enabling flexible integration into existing control systems. The screw terminals ensure a secure and reliable connection for the wiring. The adjustable overload tripping units allow adaptation to the rated current of the motor being protected, with a rated range of 6.3 to 10 A. The instantaneous short-circuit tripping unit responds immediately in the event of a short circuit to protect the installation from damage. Compliance with VDE 0106 T. 100 ensures finger-safe design, enhancing safety during operation.
Technology Explained Simply
The motor protection switch monitors the current consumption of the connected motor. In case of overload, i.e., when the motor draws a higher current for longer than permitted, the switch automatically trips. In the event of a sudden short circuit, which causes an extremely high current surge, the instantaneous tripping unit responds immediately. The phase-loss sensitivity ensures that the switch also reacts if a phase fails in the three-phase power system, which is particularly important to protect the motor from mechanical wear. The protection class IP20 means the switch is protected against contact with fingers and against the ingress of solid foreign objects larger than 12.5 mm, but not against water or dust.
Compatibility and Accessories
The PKZM0-10 can be extended with various accessories to integrate additional functions. These include auxiliary switches, which can be used for signaling or control purposes, as well as voltage tripping units that respond to undervoltage conditions. Additionally, switch modules and clip plates are available, facilitating mounting and integration into existing control systems. Compatibility with other products such as three-phase busbar blocks (e.g. B3.2/2-PKZ0) or insulating material enclosures (e.g. CI-K2-PKZ0-GV) enables modular expansion of the control system.
Mounting and Installation
Mounting is done either by screw or snap mounting, with cap mounting dimensions of 45 mm. The screw terminals allow for a secure connection of the wiring. The installation guidelines are designed to enable easy integration into standard control panels. Compliance with VDE 0106 T. 100 ensures safe operation, and mounting should be done within a closed enclosure to maintain the IP20 protection class.
Advantages in Operation
Using the PKZM0-10 provides reliable protection for electric motors, helping to avoid failures and damage to the installation. The adjustable tripping units allow individual adaptation to the specific conditions of the motor. The phase-loss sensitive design increases safety, especially in installations that rely on stable three-phase power supply. The combinability with various accessories extends functionality and allows flexible adaptation to different requirements.