Eaton 072732, EAN: 4015080727323

Moeller 072732 Motor Protection Switch 3-pole 0.25-0.4A

Industrial Material > Control devices / Pilot devices > Motor protection switch

Moeller 072732 Motor Protection Switch 3-pole 0.25-0.4A

Lieske Part No. 499989
Mfg Part No 072732
EAN-Code 4015080727323
Manufacturer Eaton
Here only 88,68 EUR
105,53 EUR incl. VAT

Further information for Moeller 072732 Motor Protection Switch 3-pole 0.25-0.4A

General
Degree of protectionIP20
Rated operating voltage690 V
Number of poles3
Adjustment range of overload release0,25-0,4 A
Short-circuit tripping behaviourUndelayed
Mounting methodscrew and snap mounting
Terminal typeScrew terminals
Cap mounting dimension45 mm
Compliance with standardsIEC/EN
Finger protectionaccording to VDE Part 100
Phase failure sensitiveYes
The PKZM0-0,4 motor protection switch from Eaton is a 3-pole protection switch of size PKZM0, specifically designed for use in industrial installations for protecting electric motors. It features an adjustable overload release and an instantaneous short-circuit release, enabling it to respond to both continuous overloads and sudden short circuits. The phase-loss-sensitive design allows detection and reaction to phase loss in the power supply network, which is important for the reliability of drive systems. The switch is rated for a nominal operating voltage of 690 V and complies with IEC/EN standards. The protection class IP20 ensures protection against finger contact, meeting the requirements for finger safety according to VDE Part 100. Mounting is possible via screw or snap-in mounting, with screw terminals ensuring a secure connection. The cap mounting dimension is 45 mm, enabling integration into standard control panels.

Applications

The PKZM0-0,4 motor protection switch is intended for use in industrial electrical installations, particularly in drive systems where protection of electric motors against overload and short circuit is required. It is suitable for installations operated indoors, as the protection class IP20 does not provide protection against water or dust. The phase-loss-sensitive design makes it especially suitable for applications where a phase loss could cause damage or operational interruption.

Functions and Equipment in Detail

The switch features adjustable overload releases, which can be set in the range of 0.25 to 0.4 A. This allows precise adjustment to match the rated current of the motor being protected. The instantaneous short-circuit release reacts immediately in the event of a short circuit to prevent damage to the drive system. The phase-loss-sensitive function detects when one of the three phases in the power supply network fails and trips the switch to protect the motor from unintended operation. Mounting is done via screw and snap-in mounting, with screw terminals ensuring a secure and durable connection. The cap mounting dimension of 45 mm enables integration into standard control panels.

Technology Explained Simply

The adjustable overload releases respond to a continuous current excess that persists over a longer period. The adjustability in the range of 0.25 to 0.4 A allows precise adaptation to the specific requirements of the motor. The instantaneous short-circuit release reacts immediately to a sudden current increase indicating a short circuit. The phase-loss-sensitive design detects when one of the three phases in the power supply network fails and trips the switch to protect the motor from unintended operation. The protection class IP20 ensures the switch is protected against finger contact, enhancing safety during operation. The nominal operating voltage of 690 V makes the switch suitable for applications in industrial networks.

Compatibility and Accessories

The PKZM0-0,4 motor protection switch can be combined with various accessories to extend its functionality. These include auxiliary switches, voltage releases, switch modules, and clip plates. These components enable integration into more complex control systems and expansion of functions, such as monitoring operating voltage or actuating additional contacts. Compatibility with accessories such as the PKZM0-XDM12 direct starter set for DILM 7 .. M15 or the PKZM0-XRM32 reversing starter set for DILM 17 ... M32 allows adaptation to specific installation requirements. The use of insulating material enclosures such as E-PKZ0-G or CI-PKZ0-GVM can increase the protection class, with the exact protection class depending on the specific enclosure design.

Mounting and Installation

Mounting of the motor protection switch is done via screw and snap-in mounting, with screw terminals ensuring a secure connection. The cap mounting dimension of 45 mm enables integration into standard control panels. Installation requires compliance with electrical standards and regulations, particularly VDE Regulation Part 100, to ensure finger safety. Precise positioning and securing of the switch in the control panel are crucial for the functionality and safety of the installation.

Advantages in Operation

The use of the PKZM0-0,4 motor protection switch provides reliable protection of electric motors against overload and short circuit. The adjustable overload releases allow precise adaptation to the specific requirements of the motor, while the instantaneous short-circuit release reacts immediately in the event of a short circuit. The phase-loss-sensitive design protects the motor from unintended operation in case of phase loss. The protection class IP20 ensures finger safety, enhancing safety during operation. Mounting via screw and snap-in mounting, along with screw terminals, enables a secure and durable connection. Compatibility with various accessories extends functionality and adaptability to specific installation requirements.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/499989
qrcode für Moeller 072732 Motor Protection Switch 3-pole 0.25-0.4A