Eaton 057857, EAN: 4015080578574

Moeller 057857 Cam Switch P3-63/EA/SVB-SW

Industrial Material > Control devices / Pilot devices > Cam switch / power switch

Moeller 057857 Cam Switch P3-63/EA/SVB-SW

Lieske Part No. 191059
Mfg Part No 057857
EAN-Code 4015080578574
Manufacturer Eaton
Here only 140,45 EUR
167,14 EUR incl. VAT

Further information for Moeller 057857 Cam Switch P3-63/EA/SVB-SW

Features
TypeToggle switch
Number of poles3P
Connectivity technologyWired
Product colourBlack
International Protection (IP) codeIP65
CertificationUL 60947-4-1; CSA - C22.2 No. 60947-4-1-14; CSA-C22.2 No. 94; IEC/EN 60947-3; CE
Built-in displayNo
Operational conditions
Operating temperature (T-T)-25 - 50 °C
Power
AC input voltage690 V
Nominal current output63 A
The Eaton P3-63/EA/SVB-SW is a toggle switch from the P3 product series, designed as a main switch or maintenance switch for industrial applications. It is used for the safe disconnection of electrical loads during operation and features a stop function that enables secure switching off. The switch is designed for built-in installation and is used in electrical control systems to interrupt the power supply to machines or systems. It is equipped with a black rotary handle and a locking ring that allows locking in position 0 (off) to prevent accidental switching on.

Applications

The switch is designed for use in industrial environments, particularly in systems requiring safe and manual power disconnection. It is suitable for machine controls, production systems, and other electrical systems where clear and visible disconnection is necessary. The protection rating IP65 ensures that the front is dust-tight and protected against water jets, making it suitable for outdoor use or in damp environments. The operating temperature ranges from -25 °C to 50 °C, enabling use in various climatic industrial environments.

Functions and Equipment in Detail

The switch is 3-pole (3P) and allows disconnection of all three conductors of a three-phase power supply. The nominal current output is 63 A, making it suitable for medium to high loads. The AC input voltage is up to 690 V, allowing use in high-voltage installations. The rated operational power AC-23A at 400 V and 50–60 Hz is 30 kW, highlighting its capability for typical industrial drives. The rated continuous current (Iu) is specified as 63 A, describing the maximum continuous load capacity of the switch.

Technology Explained Simply

The switch operates as a switch disconnector according to IEC/EN 60947-3, meaning it is intended for the safe disconnection of electrical loads, but is not designed as a protective switch for short circuits or overloads. The wired transmission technology indicates that the switch is connected to the control system via physical cables, ensuring stable and reliable signal transmission. The locking in position 0 (off) allows securing the switch against accidental switching on, which is particularly important during maintenance work. The locking ring allows mounting of a padlock to enhance operational safety.

Compatibility and Accessories

Various accessories are available for this switch to extend its functionality. These include shaft extensions (e.g. ZAV-P3, ZAV-T0, ZAV-P5), which improve operability for deeply recessed switches. Front plates such as FS-ALU980-T0 or FS(*)-P3 serve for identification and safety. Plate holders (ZFSX-P3) and mounting plate shields (MBS-I2) support installation. Key actuators (S-SOND-KMS(*)-T0) and cylinder lock locks (SVA(*)-SOND-SA(*)-T3) offer additional safety features. Knob handles such as SVB-SW-P3 or KNB-RT-P3 enable ergonomic operation. Insulating housing (CI-K4-P3-63) and terminal covers (H-P5-125/160) protect against contact with hazardous parts. Neutral conductor terminals (N-P5-250/315Z, K-CI-K4) and mounting brackets (AB-CI-K4/5) support integration into existing control systems. Locking extensions (ZVV-T0) and additional front plates (ZFS61/62-T0) offer additional safety and identification functions.

Installation and Mounting

The switch is designed as a built-in device and must be installed in a suitable enclosure. Mounting is typically done using mounting brackets or directly into pre-drilled mounting openings. Installation requires compliance with relevant standards and safety regulations, particularly IEC/EN 60947-3 and IEC/EN 60204.

Operational Advantages

The switch provides clear, visible, and safe disconnection of the power supply, facilitating maintenance and servicing of machines. The IP65 protection rating protects against dust and water, increasing reliability in harsh environments. The locking function in the off position and the possibility to mount a padlock enhance safety during maintenance work. The high rated current of 63 A and the high input voltage of 690 V make it suitable for a wide range of industrial applications. The certification according to UL 60947-4-1, CSA, IEC/EN 60947-3 and CE confirms compliance with international safety and quality standards.

Certification and Standards

The switch complies with standards IEC/EN 60947-3, IEC/EN 60204, VDE 0660, CSA-C22.2 No. 94, CSA-C22.2 No. 60947-4-1-14, UL 60947-4-1 and is marked with the CE symbol. These certifications guarantee compliance with safety and quality requirements for use in industrial electrical systems. The standard NEMA12 is also mentioned, indicating suitability for industrial control systems in North America.

Product Colour and Design

The switch is finished in black, ensuring clear visibility and a professional appearance in industrial environments. The rotary handle is also black and ergonomically shaped to enable safe and comfortable operation. The front is flat and robust to ensure the IP65 protection rating.

Operating Conditions

The switch can be operated at temperatures from -25 °C to 50 °C, making it suitable for use in environments with varying climatic conditions. The operating temperature range covers both cold production halls and warm industrial facilities. The wired transmission requires fixed cabling, ensuring the reliability of the switching function.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/191059
qrcode für Moeller 057857 Cam Switch P3-63/EA/SVB-SW