| General |
| Degree of protection | IP20 |
| Rated operating voltage | 690 V |
| Number of poles | 3 |
| Construction size | PKM0 |
| Short-circuit release | Undelayed |
| Mounting method | screw and snap mounting |
| Connection type | Screw terminals |
| Built-in size | 45 mm |
| Norm | IEC/EN60947 |
| Finger protection | according to VDE 0106 T. 100 |
The PKM0-25 motor protection switch from Eaton is a 3-pole protection switch of size PKM0, designed for use in industrial plants to protect electric motors. It complies with the IEC/EN60947 standards and features an instantaneous short-circuit tripping device that immediately reacts to sudden overloads or short circuits, preventing damage to the installation and hazards to personnel. The switch is rated for a nominal operating voltage of 690 V, making it suitable for applications in medium- and low-voltage networks. It has a protection rating of IP20, meaning it is protected against finger contact but not against dust or water. The mounting dimensions are 45 mm, making it suitable for standard control panels. Installation can be done either by screw or snap mounting, allowing flexible installation in various enclosures. The connection terminals are screw terminals, ensuring a secure and durable connection.
Motor protection switches are indispensable in industrial electrical engineering to protect motors against overload, short circuits, and other faults. The PKM0-25 is specifically designed for use in systems with electric drives, where reliable and rapid disconnection is required in case of faults. The mounting dimensions of 45 mm allow for compact placement in enclosures, while the snap mounting enables quick and tool-free installation. The screw terminals ensure a mechanically stable connection that remains secure even under vibration during operation. The nominal operating voltage of 690 V makes the switch suitable for a wide range of industrial applications, particularly in manufacturing and processing industries.
Functions and equipment in detail include an instantaneous short-circuit tripping device that immediately opens the switch when there is a sudden increase in current. This tripping device is an integral part of the switch and ensures a rapid response to dangerous current surges. The IP20 protection rating meets the requirements of VDE 0106 T. 100, which mandates finger protection but does not provide protection against dust or moisture. Therefore, the switch is suitable for indoor installations but not for outdoor use or in damp environments. Installation is done via screws or snap mounting, with the snap mounting allowing for quick and tool-free installation. The screw terminals are designed for secure connections and ensure a stable electrical connection.
Technology explained simply shows that the switch is developed based on the IEC/EN60947 standard, which governs the safety of switching devices in electrical installations. The instantaneous short-circuit tripping device reacts immediately when the current exceeds a defined threshold, preventing damage to the installation. The IP20 protection rating means the switch is protected against finger contact but not against dust or water — thus, it is intended exclusively for dry indoor environments. The nominal operating voltage of 690 V allows use in high-voltage networks, common in industrial plants. The cap mounting dimensions of 45 mm fit standard control panels and facilitate integration into existing enclosures.
Compatibility and accessories include various optional expansion modules. These include auxiliary switches such as the VHI20-PKZ0 (leading auxiliary switch) or the NHI11-PKZ0 (normal auxiliary switch), which can be used for additional control functions. Undervoltage release units such as the U-PKZ0(24VDC) or the U-PKZ0(230V50/60Hz) enable disconnection during voltage dips. Additional components include the +AGM2-10-PKZ0 tripped indicator, which signals the switch status, and busbar adapters such as the BBA0/2TS-L or BBA0-25, which allow easy mounting on rails. The BK25/3-PKZ0 supply terminal is designed for connection to terminal strips. These accessories extend the functionality of the motor protection switch and allow individual adaptation to specific requirements.
Mounting and installation are done via screw or snap mounting, with the snap mounting enabling tool-free and quick fastening. The screw terminals are designed for secure electrical connections and ensure stable connection quality. The mounting dimensions of 45 mm fit standard control panels, allowing easy integration into existing enclosures. Installation typically takes place in an enclosure, where ambient temperature and humidity must meet the requirements of the IP20 protection rating.
Operational advantages lie in the reliability and speed of response during short circuits. The instantaneous short-circuit tripping device ensures dangerous current surges are immediately disconnected, extending the lifespan of connected motors and increasing operational safety. The snap mounting allows for quick installation, reducing mounting time in enclosures. The screw terminals ensure a mechanically stable connection that remains secure even under vibration. Compatibility with various accessories allows flexible adaptation to different applications.