Eaton 014263, EAN: 4015080142638

Moeller 014263 ZE-0,16 motor protection relay 0,16 A

Industrial Material > Industrial relays and contactors > Contactors

Moeller 014263 ZE-0,16 motor protection relay 0,16 A

Lieske Part No. 434881
Mfg Part No 014263
EAN-Code 4015080142638
Manufacturer Eaton
Here only 67,71 EUR
80,57 EUR incl. VAT

Further information for Moeller 014263 ZE-0,16 motor protection relay 0,16 A

General
Degree of protectionIP20
Current range0,1–0,16 A
Auxiliary contacts Normally open (NO)1
Auxiliary contacts normally closed (NC)1
Mounting typeDirect mounting
Reset functionHand/Auto
StandardsIEC/EN 60947, VDE 0660, UL, CSA
Suitable forDILEM, DIULEM/21/MV
Phase failure sensitivityYes
Test/Off buttonYes
Free releaseYes
The Eaton motor protection relay type ZE-0,16 (manufacturer's number 014263) is an overload relay for small contactors, designed for motor protection functions in industrial installations. It monitors motor current load and protects the motor against thermal overload by automatically disconnecting when the set threshold values are reached. The device is designed for use in electrical installations certified according to standards IEC/EN 60947, VDE 0660 part 102, as well as UL and CSA. The protection rating IP20 ensures protection against contact with fingers and against solid foreign objects, but not against water or dust – thus, it is intended for use in enclosed, dry indoor environments.

Applications
This relay is specifically designed for use with contactor types DILEM and DIULEM/21/MV. These contactors are commonly used in small to medium industrial drive systems, such as pumps, fans, or conveyor systems. Direct mounting enables compact integration into existing control systems, with the relay mounted directly onto the contactor. Phase loss sensitivity according to IEC/EN 60947 and VDE 0660 part 102 ensures that disconnection occurs in the event of failure of one or more phases in a three-phase power supply, protecting the motor from damage.

Functions and Equipment in Detail
The relay features a Test/Off button, allowing manual testing of the relay’s function without operating the motor. The Reset button enables restoration of the operating state after a tripping event, with options for manual or automatic reset. Free release ensures the relay can be tripped independently of the contactor’s control, which is important during maintenance or emergencies. The auxiliary contacts consist of one normally open contact (1 S) and one normally closed contact (1 Ö), which can be used for additional control or signaling tasks, such as indicating a tripping event or controlling other components.

Technology Explained Simply
The current range setting of the relay is between 0.1 A and 0.16 A, making it suitable for small motors with low rated current. Adjustment is made via a rotary knob mounted on the device. The protection function is based on thermal simulation of the motor: the relay responds to heat generation in the motor caused by excessive current flow. If the set limit is exceeded, the motor is disconnected to prevent thermal damage. The protection rating IP20 means the device is protected against contact with fingers and against entry of solid foreign objects larger than 12.5 mm, but not against water or dust. Therefore, it is intended exclusively for use in dry, enclosed rooms.

Compatibility and Accessories
The relay is specifically designed for contactor types DILEM and DIULEM/21/MV. Compatible accessories include, for example, unlocking buttons such as M22-DZ-B (blue) or M22-DZ-X (without label), as well as button plates such as M22-XD-R-X0 (red with Stop symbol) or M22-XD-R-GB0 (red labeled STOP). These components can be used to extend the operator interface or to signal operating conditions.

Mounting and Installation
Mounting is done directly onto the contactor, enabling a compact and space-saving installation in enclosures. Direct mounting requires no additional brackets or fastening elements. Electrical connections are made via designated terminal clamps designed for the appropriate conductor cross-sections. Installation should be carried out in accordance with applicable regulations and standards, particularly considering electrical safety and correct circuit routing.

Advantages in Operation
The relay provides reliable protection for small motors, extending drive life and minimizing downtime. The integrated auxiliary contacts allow easy integration into existing control systems. Direct mounting reduces space requirements in enclosures and simplifies maintenance. The manual and automatic reset functions offer flexibility in operation, while free release provides additional safety during maintenance. Certification according to IEC/EN 60947, VDE 0660, UL, and CSA ensures compliance with international safety and quality standards.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/434881
qrcode für Moeller 014263 ZE-0,16 motor protection relay 0,16 A