| Features |
| Product colour | Black, White |
| Operating temperature (T-T) | -25 - 50 °C |
| Weight & dimensions |
| Width | 45 mm |
| Depth | 86 mm |
| Height | 58 mm |
The Eaton 22DILE is an auxiliary switch module designed for integration into industrial control systems. It serves as an add-on module for power contactors of the DILE series and enables control and monitoring of switching operations in electrical installations. The module is 4-pole and features two normally open contacts (2 S) and two normally closed contacts (2 Ö), making it suitable for standard applications in automation technology. The contacts are mechanically interlocked, ensuring a secure and reliable switching function, particularly in critical applications. The connection technology uses screw terminals designed for single-strand and fine-strand wires with cross-sections from 0.75 to 2.5 mm². Mounting is done via front mounting, allowing the module to be directly attached to the front plate of a base device.
Auxiliary switch module
The 22DILE is a modular component designed to be installed into existing contactor systems to provide additional switching functions. It is specifically intended for use with power contactors of types DILEM-10(-G)(…), DILEM-01(-G)(…), DILEM-4(-G)(…), DILER40(-G), DILER31(-G), DILER22, DILEEM-10(-G)(…), DILEEM-01(-G)(…), DILEM12-10(-G)(…) and DILEM12-01(-G)(…). The mechanically interlocked contacts comply with the requirements of IEC/EN 60947-5-1 Annex L, ensuring mechanical interlocking of the switching elements within the module. This prevents unwanted switching states and enhances operational safety.
Functions and equipment in detail
The module is designed for standard applications and offers a clear contact configuration with two normally open and two normally closed contacts. The rated operational currents depend on the operating voltage: at 220 V, 230 V, and 240 V, the current Ie = 4 A; at 380 V, 400 V, and 415 V, the current Ie = 2 A. The maximum switching frequency is 9000 operations per hour, making it suitable for frequent switching operations. The service life is 10 million operations for AC actuation and 20 million operations for DC actuation. The device life at an operating voltage of 240 V AC-15 is 0.2 million operations.
Technology explained clearly
The screw terminals allow for a secure and mechanically stable connection of the wires. The connection cross-sections are designed for single-strand and fine-strand wires from 0.75 to 2.5 mm², with fine-strand wires requiring wire end ferrules. The maximum tightening torque for the connection screws is 1.2 Nm. The power loss due to heating under load with the conventional thermal current (Ith = 10 A) is 1.5 W, both for AC and DC actuation. The rated insulation voltage is 690 V AC, and the rated operational voltage is 600 V AC. The safe isolation between coil and auxiliary contacts and between auxiliary contacts is 300 V AC.
Compatibility and accessories
The 22DILE is compatible with a wide range of power contactors from the DILE series, including models such as DILEM-10, DILEM-01, DILEM-4, DILER40, DILER31, DILER22, DILEEM-10, DILEEM-01, DILEM12-10, and DILEM12-01. The E version combinations comply with EN 50011 and are recommended. The switching elements comply with EN 50005, with switching elements according to EN 50012 being preferred. The contacts can be used as mirror contacts according to IEC/EN 60947-4-1 Annex F, but not as delayed-openers.
Mounting and installation
Mounting is done via front mounting, with the installation orientation selectable as needed, except for vertical orientation with terminals A1/A2 at the bottom. The protection rating is IP20, providing shock protection for vertical actuation from the front (EN 50274). The ambient temperature is -25 to +50 °C for open devices and -25 to +40 °C for enclosed devices. The storage temperature is between -40 and +80 °C. The shock resistance complies with IEC/EN 60068-2-27 with a half-sine shock of 10 ms. The weight is 0.04 kg.
Advantages in operation
The 22DILE offers high reliability through mechanically interlocked contacts and a long service life. The clear contact configuration with 2 S and 2 Ö enables flexible switching configurations. The screw terminals ensure a secure connection, and front mounting simplifies installation. Compatibility with a broad range of power contactors increases application flexibility. The design complies with standards IEC/EN 60947, VDE 0660, UL, and CSA, ensuring adherence to international safety standards. Contact reliability is specified with a failure rate λ < 10⁻⁸, equivalent to one failure per 100 million operations.
Operating temperature
The module is designed for operating temperatures from -25 to +50 °C, with the upper limit reduced to +40 °C for enclosed devices. The storage temperature is -40 to +80 °C. Climate resistance includes damp heat, constant according to IEC 60068-2-78 and cyclic according to IEC 60068-2-30.
Product color
The product color is Black or White, allowing the module to visually integrate into various control systems. Dimensions are 45 mm (width), 86 mm (depth), and 58 mm (height).