| General |
| Switching elements | according to EN 50005 |
| Rated operational current AC-15 220 V 230 V 240 V | 4 A |
| Rated operational current AC-15 380 V 400 V 415 V | 2 A |
| Contacts Normally open (NO) | 1 S |
| Contacts Normally closed (NC) | 1 O |
| Connection system | Screw terminals |
| Mounting type | Front fastening |
| Suitable for | DILEM-10(-G)(.), DILEM-01(-G)(.), DILEM-4(-G)(.), DILER40(-G), DILER31(-G), DILER22 |
| Function | for standard applications |
| Number of poles | 2-pole |
| Contact carrier | Positive engagement |
The article 11DILE from Eaton is an auxiliary switch module designed for integration into various power contactors of the DILE series. It serves as an additional component for control and signal transmission in electrical installations and is primarily used in industrial and commercial applications where reliable contact operation and signal processing are required. The module is 2-pole and features one close contact (1 S) and one open contact (1 Ö), making it suitable for standard applications in control and switching circuits. The contacts are mechanically interlocked, ensuring a secure and precise switching function regardless of mechanical influences.
Auxiliary switch module
The 11DILE is a modular component specifically developed for use with power contactors from the DILE family. It enables the expansion of switching functions by adding extra contacts that can be integrated into control circuits or signaling systems. The connection technology uses screw terminals, ensuring a firm and secure connection. Installation is carried out via front mounting, allowing the module to be directly attached to the front side of the respective contactor.
Functions and equipment in detail
The auxiliary switch module is designed for standard applications and offers a rating for operation with alternating current (AC-15). At voltages of 220 V, 230 V, and 240 V, the rated operating current is 4 A; at voltages of 380 V, 400 V, and 415 V, it is 2 A. These values are designed for safe and reliable operation in typical industrial voltage supplies. The contact configuration with one close contact and one open contact enables the realization of simple switching operations, such as signaling a switching state or triggering an additional control function.
Technology explained clearly
The mechanically interlocked contacts ensure that the switching movement is mechanically synchronized, independent of the position of the main contacts. This increases reliability and prevents incorrect switching. The switching elements comply with standard EN 50005, with standard EN 50012 being recommended as the preferred version. Combinations of type E correspond to standard EN 50011 and are also considered preferred. These standards define the requirements for mechanical and electrical performance of switching elements in electrical devices.
Compatibility and accessories
The 11DILE is compatible with various power contactors from the DILE series, including models DILEM-10(-G)(.), DILEM-01(-G)(.), DILEM-4(-G)(.), DILER40(-G), DILER31(-G), and DILER22. Installation is done by direct front mounting onto the respective contactor. Combining it with these contactors allows for expansion of control functions, for example, by integrating additional signals or controlling further components.
Mounting and installation
Mounting of the 11DILE is done via front mounting onto compatible power contactors. The connection terminals are designed for screw connections, ensuring a mechanically stable and electrically secure connection. Installation typically takes place as part of the overall system, with electrical connections to be made according to the specifications of the respective control system and applicable standards (e.g. VDE 0100). Positioning usually occurs within the enclosure or control unit, where the auxiliary switch module is directly mounted onto the contactor.
Advantages in operation
Using the 11DILE allows existing contactors to be extended with additional control and signaling functions without changing the main function. The mechanically interlocked contacts ensure high reliability, and the screw terminals enable easy and secure wiring. Compatibility with a wide range of DILE contactors increases flexibility in system design and reduces the number of required components. The rated values for operation at various voltages ensure broad applicability in different electrical installations.
Manufacturer number and type
The article carries manufacturer number 010224 and type 11DILE. These designations are relevant for identification and ordering in specialist trade.