Further information for easyraid ER-R5A SCSI RAID 3x 5¼" HH
General
Hard drive interface
ATA-133
Host interfaces
1x Ultra ATA-133, 1x Serial ATA 1.0
Transfer rate Ultra ATA-133
133 MB/s
Transfer rate Serial ATA 1.0
150 MB/s
Processor
TMPR4927ATB
Processor clock rate
200 MHz
Onboard memory
64 MB
Memory type
ECC
Supported RAID levels
0, 1, 0+1, 3, 5
RAID management
Serial interface, web browser-based
Built-in size
3x 5¼"" HH
JBOD support
Platform independence
Host and operating system independence
Expansion in operation
RAID level change during operation
The easyraid ER-R5A is a Direct Attached Storage (DAS) system in RAID format, designed for use in server and workstation environments. It enables the connection of multiple hard drives into a logical storage pool with various RAID levels, thereby enhancing data availability, performance, and security. The device is designed as a 3x 5¼"" HH (Half-Height) internal unit and is integrated into corresponding drive bays. It features an ATA-to-ATA RAID controller that accesses the hard drives via the ATA-133 interface and simultaneously provides two host interfaces: one Ultra ATA-133 (up to 133 MB/s) and one Serial ATA 1.0 (up to 150 MB/s), ensuring flexible connectivity to different systems.
Applications
The easyraid ER-R5A is designed for users requiring a platform-independent, transparent storage solution that operates independently of the operating system and host system. It is particularly suitable for systems requiring high data security or increased access speed, such as in small server environments, backup solutions, or workstations with high storage demands. Support for RAID levels 0, 1, 0+1, 3, and 5, as well as JBOD, allows flexible adaptation to different requirements for performance, redundancy, and capacity.
Functions and Equipment in Detail
The device supports changing the RAID level and expanding RAID capacity during operation, ensuring high operational flexibility. The RAID configuration can be controlled via a platform-independent RAID manager using a serial interface. Additionally, a web browser-based RAID management tool is available, which can be used on Windows- and Linux-based systems.
Technology Explained Simply
The controller of the ER-R5A is based on a TMPR4927ATB processor with a clock frequency of 200 MHz. The integrated memory capacity is 64 MB ECC-RAM, which ensures improved data integrity. The hard drives are accessed via the ATA-133 interface, which enables a maximum transfer rate of 133 MB/s. The two host interfaces (Ultra ATA-133 and Serial ATA 1.0) offer different connection options, with the Serial ATA 1.0 interface supporting a maximum transfer rate of 150 MB/s. The combination of both interfaces enables flexible integration into existing system architectures.
Compatibility and Accessories
The device is operating system independent and host independent, meaning it is compatible with various operating systems and host systems without requiring special drivers or software. Support for RAID levels 0, 1, 0+1, 3, and 5, as well as JBOD, offers a wide range of configuration options.
Installation and Mounting
The easyraid ER-R5A is designed as a 3x 5¼"" HH internal unit and is installed into corresponding drive bays. Installation is performed by physically mounting the unit into the bay and then connecting the host interfaces to the host system. Configuration is done via the serial interface or the web browser-based tool, with no special installation steps or additional software required.
Advantages in Operation
The ability to change RAID levels and capacities during operation reduces downtime and increases flexibility. Platform-independent control via serial interface and web browser enables easy management, even over a network. The integrated ECC memory ensures higher reliability in data processing. Support for multiple RAID levels allows adaptation to specific requirements for speed, redundancy, or capacity.