| General |
| Interface | SATA III |
| Speeds | 1,5 Gb/s; 3,0 Gb/s; 6,0 Gb/s |
| Number of hard drives | 2 |
| Hard drive format | 2,5" |
| Shaft format | 5,25" |
| RAID level | 0, 1 |
The easyraid M2S620 is an internal RAID system designed for use in computer enclosures, accommodating two 2.5-inch hard drives or SSDs in a 5.25-inch bay. It supports data management and protection through RAID levels 0 and 1. The device is designed for use in desktop systems where space-saving and simultaneous performance enhancement or data protection are required. Connection is via the SATA-III standard, enabling a maximum data transfer rate of 6.0 Gb/s. Compatibility with lower SATA speeds (1.5 Gb/s and 3.0 Gb/s) ensures use with older or different storage media.
Internal RAID System
The M2S620 is designed as an internal solution, installed directly into the 5.25-inch bay of a computer enclosure. It provides space for two 2.5-inch drives, enabling the use of SSDs or traditional hard drives. The installation solution reduces space requirements within the enclosure and allows compact integration into existing systems.
Functions and Features in Detail
The system supports RAID levels 0 and 1. RAID 0 enables data striping across both drives, increasing read and write speeds. RAID 1 ensures data protection through mirroring, creating a redundant copy on the second drive. These functions are relevant for users who prioritize either speed or data security. Selection of the RAID mode is performed via the device’s integrated control.
Technology Explained Simply
The SATA-III standard (6.0 Gb/s) provides high bandwidth for data transfer, which is particularly beneficial when using SSDs or RAID 0. Support for lower SATA speeds (1.5 Gb/s and 3.0 Gb/s) ensures compatibility with older storage devices. RAID control is handled internally within the device, with no additional drivers or software required. Operation is via the SATA interface, which is standard on modern motherboards.
Compatibility and Accessories
The easyraid M2S620 is designed for use with SATA-compatible 2.5-inch hard drives and SSDs. Using SATA-III drives fully exploits the maximum bandwidth. Compatibility with older SATA generations allows use with legacy storage media.
Installation and Mounting
Installation is performed by mounting into a free 5.25-inch bay of the computer enclosure. Fixing is achieved using the integrated mounting elements of the device. RAID mode configuration is done via the integrated control, with no additional software or drivers required.
installation in a 5.25-inch bay, with fixing via integrated mounting elements. RAID mode configuration is done via the integrated control, with no additional software or drivers required.
Operational Advantages
The combination of compact design and RAID functionality offers a flexible solution for use in desktop systems. Using RAID 0 increases access speed, while RAID 1 provides redundant data protection. SATA-III support ensures high data transfer rates, which can be fully utilized with SSDs. The simple installation without additional software makes the device suitable for technically experienced users.