Draka Comteq NSSHOEU-J5x4-T

Draka Comteq NSSHOEU-J5x4-T rubber sheathed cable 5x4,0 mm² yellow

Cables > Rubber hose / PUR cable > Special rubber hose cable

Draka Comteq NSSHOEU-J5x4-T rubber sheathed cable 5x4,0 mm² yellow

Lieske Part No. 249479
Mfg Part No NSSHOEU-J5x4-T
EAN-Code
Manufacturer Draka Comteq
Here only 11,39 EUR
13,55 EUR incl. VAT

Further information for Draka Comteq NSSHOEU-J5x4-T rubber sheathed cable 5x4,0 mm² yellow

General
Nominal voltage0,6/1 kV
Test voltage3 kV
Insulation resistance20 MΩ·km
Temperature range for installation-20 °C to +80 °C
Temperature range after installation-40 °C to +80 °C
Operation temperature+90 °C
Bending radius5 x cable diameter
Flame retardancyVDE 0472 T. 804, test type B (IEC 332-1)
Oil resistanceVDE 0472 T. 803, test type A
Conductortinned copper stranded wire, fine-stranded class 5
Wire insulationRubber compound according to VDE 0207 T. 20
Conductor markingaccording to VDE 0293-308
Outer sheathRubber compound according to VDE 0207 T. 21
Sheath colourYellow
Number of cores5
Core cross section4,0 mm²
The rubber hose cable NSSHÖU-J 5X4,0 from Draka Comteq is a special cable for demanding operating conditions in industry, mining, and construction sites. It is suitable for very high mechanical stresses, both indoors and outdoors, in dry and damp rooms, as well as for fixed installation. The operating conditions must be determined individually depending on the application field. The cable is equipped with a yellow outer sheath, making it visually clearly identifiable and ensuring safe identification.

Applications

The cable is specifically designed for environments where high mechanical loads, such as tension, pressure, or bending, occur. This includes, for example, use in underground mining, open-pit mining, construction sites, and industrial plants. It is suitable for use in dry and damp rooms as well as outdoors, with installation requiring consideration of the specific environmental conditions. The cable can also be used for fixed installation, with the exact operating conditions to be determined depending on the application.

Functions and Equipment in Detail

The cable consists of five conductors, each with a cross-section of 4.0 mm². Each conductor is insulated with a rubber compound according to VDE 0207 T. 20, ensuring high electrical insulation and mechanical stability. The conductors are stranded with optimal lay lengths to achieve even distribution of mechanical stress. Conductor identification follows VDE 0293-308, enabling unambiguous identification of individual conductors. The conductors are made of tinned copper wire, fine-stranded class 5, ensuring high flexibility and durability under frequent bending.

Technology Explained Simply

The cable has a rated voltage of 0.6/1 kV, making it suitable for use in industrial and construction applications. The test voltage is 3 kV, highlighting the electrical strength of the insulation. The insulation resistance is 20 MΩ·km at 20 °C, ensuring high electrical insulation and low leakage currents. The operating temperature can reach up to +90 °C, with installation permitted at temperatures from -20 °C to +80 °C. After installation, the cable is designed for temperatures from -40 °C to +80 °C. The minimum bending radius is 5 times the cable diameter for free installation, enabling flexible handling. The cable is oil-resistant according to VDE 0472 T. 803, test type A, and flame-retardant according to VDE 0482-332-1-2 (IEC 60332-1), making it suitable for use in environments with increased fire risk. The fire behavior corresponds to VDE 0472 T. 804, test type B (equivalent to IEC 332-1), ensuring limited flame spread.

Compatibility and Accessories

The cable is designed for use in industrial and construction applications where high mechanical loads and environmental conditions prevail. It can be combined with appropriate connectors, cable lugs, and other connection elements suitable for the specific application. The use of accessories depends on specific requirements and must be determined individually.

Installation and Mounting

Mounting the cable requires careful planning of the installation, particularly regarding mechanical loads and ambient temperature. Installation is performed at temperatures between -20 °C and +80 °C, with an operating temperature up to +90 °C permitted after installation. The minimum bending radius is 5 times the cable diameter, enabling flexible installation. The cable is suitable for fixed installation, with exact operating conditions to be determined depending on the application.

Advantages in Operation

The cable features high mechanical strength, oil resistance, and flame retardancy. The use of tinned copper wire class 5 ensures high flexibility and durability. The rubber compound of the insulation and outer sheath provides high electrical insulation and resistance to mechanical stress. The flame-retardant design according to IEC 60332-1 reduces fire risk and increases operational safety. The cable is designed for use in demanding environments where high mechanical loads and environmental conditions prevail.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/249479
qrcode für Draka Comteq NSSHOEU-J5x4-T rubber sheathed cable 5x4,0 mm² yellow