Draka Comteq 60011420, EAN: 4065624015805

Draka Comteq 60011420 LWL Cable 12G50 OM4 3kN

Cables > Data lines > Laying fiber optic cable

Draka Comteq 60011420 LWL Cable 12G50 OM4 3kN

Lieske Part No. 1319938
Mfg Part No 60011420
EAN-Code 4065624015805
Manufacturer Draka Comteq
Here only 3,59 EUR
4,27 EUR incl. VAT

Further information for Draka Comteq 60011420 LWL Cable 12G50 OM4 3kN

General
Fiber qualityMultimode OM4
Number of fibres12
Tensile strength3000 N
EuroclassEca
Degree of protectionUV-resistant, drip-proof, rodent-protected
Cable jackethalogen-free, flame retardant
Central elementgel-filled bundle wire
Fibre diameter50/125 µm
Cable colourBlue
Outer diameter7,5 mm
Installation areaindoor and outdoor, direct burial, conduit installation
Compliance with standardsEN 50 173-1, ISO 11801 2nd Edition, IEC 60794-2, IEC 60332-1, IEC 60754-2, IEC 61034
Fibre technologyBendbright (bend-insensitive)
Material compositionmetal-free
The LWL installation cable from Draka Comteq, type U-DQ(ZN)BH ZB 12G50 OM4 3kN, is a central, gel-filled bundle cable for structured cabling. It features 12 bend-insensitive Bendbright fibres in the multimode OM4 standard and is designed for use in indoor and outdoor environments. The cable is metal-free, UV-resistant, longitudinally watertight, and rodent-protected, making it suitable for direct burial (in an appropriate sand bed), conduit installation, and as a flame-retardant cable indoors. The jacket is made of halogen-free, flame-retardant material complying with the requirements of standards IEC 60332-1, IEC 60754-2, IEC 61034, and Euroclass Eca. The central arrangement of the fibres enables a slim and cost-efficient cable design with an outer diameter of 7.5 mm. The cable exceeds the requirements of standards EN 50 173-1, ISO 11801 2nd Edition, and IEC 60794-2. The fibres are bundled in a gel-filled central element designed for fibre counts from 4 to 24. The cable jacket is blue, facilitating visual identification during installation. The tensile strength is 3000 N, ensuring safe installation under tension.

Applications
This cable is designed for use in indoor and outdoor environments. It is suitable for direct burial, where a sand bed is recommended as a protective layer, as well as for conduit installation. Indoors, it can be used as a flame-retardant cable, allowing its use in buildings with enhanced fire safety requirements. UV resistance enables long-term outdoor use without material degradation due to sunlight exposure.

Functions and Features in Detail
The cable includes 12 multimode OM4 fibres, optimised for high data rates and short transmission distances. The fibres are bend-insensitive (Bendbright technology), enabling flexible installation even in tight bends without affecting optical performance. The gel-filled central element protects the fibres from mechanical stress and prevents moisture ingress. The metal-free design reduces weight and protects against electromagnetic influences. The longitudinally watertight construction prevents water ingress along the cable length, which is particularly important for direct burial.

Technology Explained Simply
The designation U-DQ(ZN)BH ZB 12G50 OM4 3kN describes the technical specifications: U stands for unshielded, DQ(ZN)BH for the construction with a central gel-filled bundle, ZB for tensile strength, 12G50 for 12 fibres with a 50/125 µm core diameter, OM4 for the multimode standard, and 3kN for tensile strength. OM4 fibres are designed for data transmission rates up to 10 Gbit/s over distances up to 550 metres. The Euroclass Eca indicates the flame-retardant property of the jacket material, which is only limitedly flammable and does not release toxic gases when exposed to fire. Standards IEC 60332-1 and IEC 61034 ensure flame retardancy and smoke development, while IEC 60754-2 confirms halogen-free composition.

Compatibility and Accessories
The cable is designed for use with compatible LWL connection components such as patch panels and patch cables. Available accessories include, for example, the patch panel 1504577506-F OpDAT fix2 splice 6xLC-D OM4 and the LWL duplex patch cable 2716-10-0018 LC/LC 3.0 m OM4 Violet. These components enable connection to network devices and integration into existing infrastructures. Connections are made using LC connectors, which are standardised for multimode OM4 fibres.

Installation and Mounting
Installation is carried out by direct burial (with sand bed), conduit installation, or indoors. The tensile strength of 3000 N allows safe installation under tension, for example during pull-through installation. The bend-insensitive fibres permit installation with smaller bending radii, simplifying mounting in complex cabling situations. The metal-free design reduces weight and facilitates handling. UV resistance and longitudinally watertight construction ensure high durability in outdoor environments.

Operational Advantages
The cable offers high reliability due to its robust construction and use of bend-insensitive fibres. Flame-retardant and halogen-free materials increase safety in building operations. UV resistance and rodent protection extend service life in outdoor applications. The central bundle construction enables compact installation, saving space in cable ducts. Compliance with international standards ensures interoperability and quality assurance in network infrastructures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1319938
qrcode für Draka Comteq 60011420 LWL Cable 12G50 OM4 3kN