Further information for Draka Comteq 60011299 fiber optic cable U-DQ(ZN)BH ZB 12E9 OS2 3kN
General
DIN VDE designation
U-DQ(ZN)BH ZB 12E9 OS2 3kN
Fiber quality
Singlemode OS2
Number of fibres
12
Tensile strength
3000 N
Euroclass
Eca
Cable jacket
halogen-free, flame retardant
Colour
Blue
Outer diameter
7,5 mm
Central element
gel-filled bundle wire
Applications
Interior and exterior area
Standards
EN 50 173-1, ISO 11801 2nd edition, IEC 60794-2
Flame retardant standards
IEC 60332-1, IEC 60754-2, IEC 61034
DoP number
1003947
UV resistance
Longitudinal waterproof
Metal-free
Rodent-protected
The LWL installation cable from Draka Comteq, type U-DQ(ZN)BH ZB 12E9 OS2 3kN, article number 60011299, is a cable for structured cabling in indoor and outdoor environments. It features a central gel-filled bundle core construction and contains 12 singlemode fibres of OS2 quality. The design enables a slim and cost-efficient cable structure, suitable for direct underground installation (in an appropriate sand bed), conduit installation, and for indoor use as a flame-retardant cable.
Applications
This cable is designed for use in indoor and outdoor environments. It is suitable for direct underground installation, where a sand bed is recommended, as well as for installation in conduits. The UV resistance and longitudinal water-tight construction make it suitable for outdoor applications exposed to sunlight and moisture. The metal-free construction protects against corrosion and allows safe installation in various environments.
Functions and Equipment in Detail
The 12 singlemode OS2 fibres are arranged in a central gel-filled bundle core. This construction ensures stable guidance of the fibres and protects them from mechanical stress. The gel prevents moisture ingress along the fibres and ensures high longitudinal water-tightness. The fibres are marked blue, enabling easy identification within the cable. The tensile strength is 3000 N, ensuring safe installation under tension.
Technology Explained Simply
The OS2 fibres are designed for optical data transmission over long distances. They exhibit low attenuation and are therefore particularly suitable for high-speed applications. The cable is metal-free, minimizing the risk of corrosion and electromagnetic interference. The longitudinal water-tight construction prevents water ingress along the cable length, ensuring functionality even when installed underground or in moist environments. The UV resistance protects the cable from UV radiation, which can cause material degradation.
Compatibility and Accessories
The cable meets the requirements of standards EN 50 173-1, ISO 11801 2nd edition, and IEC 60794-2. It is therefore suitable for use in structured cabling systems. The Euroclass Eca indicates that the cable is made of halogen-free, flame-retardant material that does not release toxic gases in case of fire. The standards IEC 60332-1, IEC 60754-2, and IEC 61034 refer to the flame retardancy and smoke development properties of the jacket material.
Installation and Mounting
Installation is carried out by direct underground installation (in a sand bed), conduit installation, or indoors. The tensile strength of 3000 N allows safe installation without damaging the fibres. The metal-free construction permits flexible installation without additional corrosion protection measures. The blue-marked fibres facilitate identification and cabling within the network.
Operational Advantages
The cable offers high mechanical stability due to the tensile strength of 3000 N and the longitudinal water-tight construction. The UV resistance and metal-free design increase service life and reliability. The halogen-free, flame-retardant jacket ensures safe use indoors. Compliance with standards EN 50 173-1, ISO 11801, and IEC 60794-2 ensures compatibility with existing cabling systems. The central bundle core design enables a slim cable structure, saving space and simplifying installation.