| General |
| Category | 7 |
| Bandwidth | 1000 MHz |
| Shielding | doubly shielded (foil pair shielding + braid coverage) |
| Coupling attenuation | 85 dB |
| Insulation class | D |
| Number of conductors | 4 pairs (8 conductors) |
| AWG size | 23 |
| Conductor class | 1 (solid) |
| Core insulation | foamed polyethylene with skin (Foam/Skin PE) |
| Outer sheath | polyethylene (PE), halogen-free |
| Colour | Black |
| Nominal outer diameter | 8,6 mm |
| Impedance | 100 Ohm |
| NVP value | 79 % |
| Run-time delay (max) | 427 ns/100m |
| Propagation delay (max) | 12 ns/100m |
| Loop resistance | 154 Ohm |
| Transfer impedance at 10 MHz | 5 mOhm/m |
| Test voltage | 1 kV |
| Operating capacity (nominal) | 43 nF/km |
| Copper weight | 38 kg/km |
| Permissible temperature after installation | -40 to 60 °C |
| Permissible temperature during installation | 0 to 50 °C |
| Bending radius (installation) | 8 x outer diameter |
| Bending radius (installed) | 4 x outer diameter |
| Maximum tensile strength | 0,15 kN |
| Packaging | Drum |
The Draka Comteq UC900 SS23 4P AUSSENKABEL PE is a copper data cable of Category 7, specifically designed for structured cabling in outdoor environments. It features a bandwidth of 1000 MHz and is suitable for use in campus, riser, and horizontal cabling applications. The cable is double shielded, with each pair being individually shielded with foil pair shielding, and the entire cabling assembly protected by a high-quality braided shield. This shielding achieves a coupling attenuation of 85 dB, meeting Class D separation according to EN 50174, ensuring high immunity against electromagnetic interference. The outer jacket is made of halogen-free polyethylene (PE), which is UV-resistant and approved for direct burial. The cable is black in colour and supplied on a reel with a length of 500 metres.
Applications
The cable is designed for outdoor use and is suitable for direct burial. It is also suitable for use in buildings, fire protection channels, and in-situ installations. Cabling can be performed using LSA technology, enabling integration into existing building automation systems. The approval for direct burial and UV resistance make it particularly suitable for outdoor applications such as industrial facilities, transportation systems, or security camera systems.
Functions and Features in Detail
The cable features 4 pairs, comprising a total of 8 copper conductors in AWG23 size, configured as solid (Class 1). The conductor insulation consists of foamed polyethylene with a skin layer (Foam/Skin PE), ensuring good electrical insulation and mechanical stability. The standard conductor colours are blue/white, orange/white, green/white, and brown/white, simplifying identification and cabling. The shielding is made of tinned copper, providing high electrical conductivity and corrosion resistance.
Technology Explained Simply
The double shielding — foil pair shielding per pair and an outer braid — provides effective protection against electromagnetic interference (EMI) and crosstalk. The coupling attenuation of 85 dB corresponds to Class D separation, ensuring high signal quality and reliability at high data rates. The impedance is 100 Ohm, meeting the standard for Ethernet cabling. The NVP value (Nominal Velocity of Propagation) of 79% means the signal is transmitted at 79% of the speed of light, which is important for calculating propagation delay. The maximum propagation delay is 427 ns/100m, and the maximum propagation delay variation is 12 ns/100m.
Compatibility and Accessories
The cable exceeds requirements according to EN 50173-1, EN 50288-4-1, ISO/IEC 11801, IEC 61156-5, and IEEE 802.3 af/at/bt. It is future-proof for all applications in Class C, D, E, EA, and F. It supports transmission technologies such as telephony, Ethernet, Fast Ethernet, Gigabit Ethernet, and 10Gigabit Ethernet, including 10BaseT, 100BaseT, 1000BaseT, 1GBase-T, and 10GBaseT, with data rates up to 10,000 MBit/s. It is suitable for PoE (Power over Ethernet) and PoE+ operation, with a maximum channel length of 100 metres. Certifications include the GHMT PREMIUM Verification Program (PVP) and the 3P-Certification Program.
Installation and Mounting
The permissible cable outer temperature after installation ranges from -40 °C to +60 °C. During installation and handling, the temperature must be between 0 °C and +50 °C. The bending radius is 8 times the outer diameter during installation and 4 times after installation. The nominal outer diameter of the cable is 8.6 mm. The maximum tensile strength during installation is 0.15 kN. The cable is suitable for connection to outlets, patch panels, and modules.
Operational Advantages
The cable offers high reliability and signal quality due to double shielding and a bandwidth of 1000 MHz. UV resistance and approval for direct burial extend its application range in outdoor environments. Compatibility with PoE and PoE+ enables power delivery over the network cable, simplifying installation of IP cameras, access points, or other PoE-enabled devices. Certifications and compliance with international standards ensure quality and interoperability.
Certifications and Standards
The cable complies with standards IEC 61156-5, EN 50288-4-1, ISO/IEC 11801, EN 50173-1, and IEEE 802.3 af/at/bt. Certifications include the GHMT PREMIUM Verification Program (PVP) and the 3P-Certification Program. The Eurobrand class is NPD, indicating a halogen-free and flame-retardant material composition.
Application Properties
The permissible temperature during installation is between 0 °C and 50 °C. After installation, the cable can withstand temperatures from -40 °C to 60 °C. The bending radius is 8 times the outer diameter during installation and 4 times after installation. The maximum tensile strength during installation is 0.15 kN. The cable is suitable for direct burial and outdoor use.
Product Data
The nominal outer diameter is 8.6 mm. The copper weight is 38 kg/km. The cable is packaged on a reel with a length of 500 metres. The gross weight is 35.122 kg. The article number is 60011276.