Draka Comteq 0104855, EAN: 4046725032274

Draka Comteq 0104855 NSSHÖU-J 4X16,0 rubber cord yellow

Cables > Rubber hose / PUR cable > Special rubber hose cable

Draka Comteq 0104855 NSSHÖU-J 4X16,0 rubber cord yellow

Lieske Part No. 585684
Mfg Part No 0104855
EAN-Code 4046725032274
Manufacturer Draka Comteq
Here only 31,41 EUR
37,38 EUR incl. VAT

Further information for Draka Comteq 0104855 NSSHÖU-J 4X16,0 rubber cord yellow

General
Nominal voltage0,6/1 kV
Test voltage3 kV
Insulation resistance20 MΩ·km
Installation temperature range-20 to +80 °C
Temperature range after installation-40 to +80 °C
Maximum operating temperature+90 °C
Minimum bending radius5 x cable diameter
Flame retardancyVDE 0472 T. 804, test type B
Oil resistanceVDE 0472 T. 803, test type A
Core cross section4x16,0 mm²
Conductor typetinned copper stranded wire, fine-stranded class 5
Wire insulationRubber compound according to VDE 0207 T. 20
Conductor markingaccording to VDE 0293-308
Outer sheathRubber compound according to VDE 0207 T. 21
Sheath colourYellow
The NSSHÖU-J 4X16,0 rubber hose cable from Draka Comteq is a special cable designed for applications with very high mechanical loads. It is particularly suitable for use in underground mining, open-pit mining, construction sites, and industrial environments. The cable can be used in dry and damp rooms as well as outdoors and is also suitable for fixed installation, with specific operating conditions to be determined on a case-by-case basis. The cable features a yellow outer sheath, which enables good visibility and identification.

Applications

The cable is designed for demanding environments where high mechanical stresses such as tension, pressure, bending, or abrasion occur. Typical applications include mobile machinery, conveyor systems, construction machinery, and industrial plants, where high flexibility and durability of the cable are required. Outdoor use is possible, as the cable is also resistant to weather influences such as moisture and temperature fluctuations.

Functions and Equipment in Detail

The cable consists of four conductors, each with a cross-section of 16.0 mm². The conductors are made of fine-stranded, tinned copper wire of class 5, ensuring high flexibility and durability under frequent bending and torsional loads. The conductors are insulated with a rubber compound according to VDE 0207 T. 20 and marked according to VDE 0293-308. The conductors are stranded with optimal lay lengths to ensure even distribution of mechanical stress and extend service life. The outer sheath is made of a rubber compound according to VDE 0207 T. 21 and is yellow in colour, enabling easy identification.

Technology Explained Simply

The rated voltage is 0.6/1 kV, meaning the cable is suitable for operating voltages up to 1 kV. The test voltage of 3 kV ensures that the insulation remains stable even under increased electrical stress. The insulation resistance of 20 MΩ·km at 20 °C ensures high electrical insulation and minimizes leakage currents. The cable can be installed at temperatures from -20 °C to +80 °C, and after installation, it is resistant to temperatures from -40 °C to +80 °C. The maximum operating temperature is +90 °C, enabling high thermal load capacity. The minimum bending radius is 5 times the cable diameter for free installation, allowing flexible handling even in tight bends. The cable meets the requirements for flame behaviour according to VDE 0472 T. 804, test type B (equivalent to IEC 332-1), and is therefore flame retardant. The oil resistance according to VDE 0472 T. 803, test type A, makes the cable suitable for environments with oil and fat contact.

Compatibility and Accessories

The cable is designed for use in industrial and construction applications where high mechanical and thermal loads occur. It can be connected to standard terminals, plug connectors, and switching devices designed for a rated voltage of 0.6/1 kV. The yellow colour of the outer sheath serves as identification and facilitates recognition in plant construction. The cable is not specifically designed for use in explosive atmospheres, as no corresponding approvals (e.g. ATEX) are mentioned.

Installation and Mounting

Installation is carried out by free laying, ensuring the minimum bending radius of 5 times the cable diameter is maintained. Laying is possible at temperatures between -20 °C and +80 °C. After installation, the cable is suitable for operating temperatures up to +90 °C. The cable can be laid in dry, damp rooms, and outdoors. The conductors are connected using suitable terminals or plug connectors designed for the rated voltage and cross-section.

Operational Advantages

The cable offers high mechanical strength and flexibility, making it suitable for mobile and stationary applications in demanding environments. The high thermal load capacity and oil resistance increase service life and reduce maintenance requirements. The flame-retardant design improves fire safety in industrial plants. The clear identification according to VDE 0293-308 and the yellow sheath colour facilitate identification and maintenance of the cable during operation.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/585684
qrcode für Draka Comteq 0104855 NSSHÖU-J 4X16,0 rubber cord yellow