| General |
| Degree of protection | not specified |
| Colour | Light grey |
| Length/depth | 500 mm |
| Load capacity | 50 kg |
| Housing depth | up to 800 mm |
| Product type | Shelf |
| Built-in width | 483 mm |
| Mounting height | 1HE |
| Adjustable depth | 500-700 mm |
The DIGITUS rack shelf DN-97646 is a 1HE module for fixed installation in 483 mm (19 inch) network or server enclosures with a depth of up to 800 mm. It serves as a stable mounting surface for components that do not fit directly into the standard 19-inch format, such as special power supply or amplifier units. The perforated sheet metal allows for flexible mounting of devices using screws or cable ties. The mounting rails are adjustable, enabling the shelf to be positioned at a depth between 500 mm and 700 mm to accommodate different device dimensions.
Rack shelf
The rack shelf is designed as a 1HE module, corresponding to a height of 44 mm. It is intended for installation in enclosures with a depth of up to 800 mm. The standard depth is 500 mm, but it can be extended up to 700 mm by adjusting the mounting rails. The perforated sheet metal is sturdy and allows for secure mounting of devices. The rack shelf is light grey, which visually integrates well into typical server and network enclosures.
Functions and equipment in detail
The perforated sheet metal offers a load capacity of up to 50 kg, making it suitable for use with heavier devices. The mounting rails can be attached to the four 483 mm (19 inch) profile rails of the enclosure and can be adjusted in depth if required. The adjustability of the rails enables flexible use, especially with devices of varying depths. The delivery includes the rack shelf module and the necessary mounting hardware.
Technology explained simply
The construction of the rack shelf is based on a perforated sheet metal, which ensures both high load capacity and good ventilation. Mounting is done to the standardised 483 mm (19 inch) profile rails, which are commonly installed in most network and server enclosures. The adjustability of the mounting rails allows adaptation to devices with depths between 500 mm and 700 mm. The maximum load capacity of 50 kg is sufficient for use in professional IT infrastructures.
Compatibility and accessories
The rack shelf is designed for 483 mm (19 inch) enclosures with a depth of up to 800 mm. It is compatible with standard 19-inch profile rails and can be used in network and server enclosures. The adjustability of the mounting rails allows adaptation to various device dimensions.
Installation and mounting
Mounting is done by attaching to the four 483 mm (19 inch) profile rails of the enclosure. The mounting rails are adjustable, allowing the rack shelf to be positioned at the desired depth. The included mounting hardware enables secure installation. Installation does not require special tools, although the use of a screwdriver is recommended.
Advantages in operation
The rack shelf provides a stable and load-bearing surface for devices that do not conform to the 19-inch standard. The adjustability of the mounting rails increases flexibility when mounting different devices. The perforated surface supports air circulation, improving cooling of mounted devices. The maximum load capacity of 50 kg makes the rack shelf suitable for use in professional environments. The delivery includes the rack shelf module and the necessary mounting hardware.