Further information for DIGITUS DN-95140 Switch 8-Port Gigabit PoE black
General
Number of ports
8
PoE-capable ports
6
PoE standard
IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
PoE budget
180 W
PoE power per port (max.)
90 W
PoE power per port (max., other ports)
30 W
SFP ports
2
Ethernet speed
10/100/1000 Mbps
Operating voltage
100–240 V
Frequency
50/60 Hz
Total power consumption
190 W
Transfer mode
Store-and-forward
Backplane
20 Gbit/s
MAC address list
4K
Jumbo frames
9216 Bytes
Packet buffer
1.5 Mbit
Packet forwarding rate
13,39 Mpps
Operation temperature
0–40 °C
Operating humidity
10–90 % RH (non-condensing)
Storage temperature
-40–70 °C
Storage humidity
5–90 % RH (non-condensing)
Ventilation
Active
Energy saving
IEEE802.3az (EEE)
Mounting method
Desktop, wall, 19 inch
Uplink port connection
SFP
Auto MDI/MDIX
Auto Negotiation
Managed
Suitable for outdoor use
Vandalism protection
VLAN
The DIGITUS 8-Port Gigabit PoE-Switch DN-95140 is an unmanaged network switch designed to supply PoE-capable devices with power and data over an Ethernet cable. It features a total of eight RJ45 ports, six of which are configured as PoE ports. Two of these PoE ports support the PoE++ specification IEEE 802.3bt with a maximum power output of 90 W per port, while the remaining four PoE ports support the standards IEEE 802.3at/af with up to 30 W per port. The two remaining RJ45 ports serve as uplink or LAN connections and are not intended for PoE power supply. Additionally, two SFP uplink ports are integrated, which can be equipped with SFP modules for fibre optic or copper technology to extend the network connection over longer distances or into existing fibre optic infrastructures. The maximum data transfer rate is 1000 Mbps per port, with Auto MDI/MDIX and Auto Negotiation standardly supported for the RJ45 connections to ensure flexible and error-free connectivity.
Applications
The switch is suitable for a wide range of application scenarios, particularly in environments where multiple PoE-capable devices need to be connected. Examples include surveillance cameras, access control systems, POS terminals, or parking systems. The high PoE power output of up to 90 W per port enables the supply of high-performance devices that exceed standard PoE requirements. The total power output for PoE devices is 180 W, allowing flexible use with multiple devices. The integrated SFP ports expand the application possibilities in networks with fibre optic connections or when connecting switches over greater distances.
Functions and Equipment in Detail
The switch features a DIP switch on the front panel, allowing three operating modes to be set: Legacy BT, BT, and UPoE. These modes influence the PoE negotiation logic and enable adaptation to different network environments. LED status indicators on the front panel display the operating status of individual ports, facilitating the diagnosis of connection issues. Power supply is provided via an integrated power supply unit with an operating voltage of AC 100–240 V / 50/60 Hz. The total power consumption is 190 W, with 180 W available for PoE devices. The switch is designed for indoor use and features active ventilation for cooling internal components.
Technology Explained Simply
PoE technology (Power over Ethernet) enables simultaneous power and data transmission over a single Ethernet cable. This reduces the need for separate power supplies and simplifies installation, especially for devices mounted in hard-to-reach locations. Support for the standards IEEE 802.3af, at, and bt ensures compatibility with a wide range of PoE devices. PoE++ support (IEEE 802.3bt) enables higher power outputs required for modern, high-performance devices. The SFP ports allow the use of SFP modules that support either copper or fibre optic cables, thereby extending the reach and bandwidth of the network connection.
Compatibility and Accessories
The switch is compatible with a wide range of PoE-capable devices supporting the standards IEEE 802.3af, at, or bt. For connections over fibre optic or longer copper distances, SFP modules can be used. As suitable accessories, a Cat.6a grey 0.5 m S/FTP patch cable, AWG 27/7, 2713-13-0001 is offered, suitable for connection to the RJ45 ports. Mounting is possible in 19-inch racks, on a desk, or on a wall, with dimensions of 220 x 150 x 44 mm (L x W x H).
Mounting and Installation
Installation is performed using the integrated mounting brackets designed for securing in a 19-inch rack. Alternatively, the switch can be mounted on a desk or on a wall. The front panel features LED indicators and a DIP switch for mode selection. Power supply is provided via the integrated power supply unit, which is connected to a standard power outlet. Cabling of the RJ45 ports is done using standard Ethernet cables, with automatic detection of MDI/MDIX simplifying the cabling process.
Operational Advantages
The switch offers high flexibility through the combination of PoE and uplink ports, as well as support for SFP modules. Automatic detection of PoE devices and support for multiple operating modes increase adaptability to different network requirements. LED indicators facilitate monitoring of the operating status, and integrated ventilation ensures reliable cooling. The unmanaged architecture reduces complexity and is suitable for users who do not require advanced network management functions.