DIGITUS DN-93904, EAN: 4016032267164

DIGITUS DN-93904 Patch Cable Adapter Cat5e 2xRJ45-1xRJ45

Cables > Data lines > Cat5 cable laying

DIGITUS DN-93904 Patch Cable Adapter Cat5e 2xRJ45-1xRJ45

Lieske Part No. 1253139
Mfg Part No DN-93904
EAN-Code 4016032267164
Manufacturer DIGITUS
Here only 4,92 EUR
5,85 EUR incl. VAT

Further information for DIGITUS DN-93904 Patch Cable Adapter Cat5e 2xRJ45-1xRJ45

General
Cable length0,19 m
Cable categoryCAT 5e
Degree of protectionshielded
Connection2x RJ45 female to 1x RJ45 plug
Pin assignment1-1, 2-2, 3-3, 4-1, 5-2, 6-6, 7-3, 8-6
Housing materialABS halogen-free, UL 94 V0
Contact materialphosphor bronze with 50µ tin plating over 60µ Ni coating
PCB materialFR4, 1.2mm thickness
Plug cycles750
Operation temperature-40 °C
ColourBlack
Anti-kink sleeveYes
Locking leverYes
The DIGITUS DN-93904 is a shielded CAT 5e patch cable adapter designed as a T-adapter to connect two RJ45 sockets at one end with an RJ45 plug at the other end. It is used to connect two network devices via a single cable, with wiring configured for PC-to-PC operation. The design allows the use of an existing network cable to connect two end devices to a single port, with signals transmitted through a 0.19 m long patch cable.

Applications

The adapter is suitable for use in local area networks (LAN), particularly in environments where multiple devices need to be connected to a single network port without requiring additional switches or hubs. It is typically used in offices, server rooms, or during network infrastructure installations where a temporary or permanent T-branching is required. The wiring configuration 1-1, 2-2, 3-3, 4-1, 5-2, 6-6, 7-3, 8-6 enables direct signal transmission between pins, with pins 4, 5, 7, and 8 being rerouted to the corresponding pins of the other socket connection due to the T-branching.

Features and Equipment in Detail

The adapter features two RJ45 sockets, each located at one end of the device, and an integrated patch cable with an RJ45 plug at the other end. The patch cable is equipped with a strain relief boot that reduces mechanical stress on the cable and provides tension relief to extend the cable's lifespan. Additionally, the plug includes a latch lock protection to prevent accidental disconnection. The pin wiring is designed to be optimized for direct PC-to-PC operation, with signals from pins 1 to 3 and 6 transmitted directly, while pins 4, 5, 7, and 8 are rerouted to the corresponding pins of the second socket.

Technology Explained Simply

The use of CAT 5e cables enables data transfer rates of up to 100 Mbit/s at a bandwidth of 100 MHz, which is sufficient for most standard applications in local networks. The shielding of the adapter protects data transmission from electromagnetic interference (EMI), which may be caused by nearby electrical devices or wiring. The materials consist of ABS (halogen-free, UL 94 V0) for the housing, copper with nickel plating for the surface, and phosphor bronze with a 50 µm tin plating over a 60 µm nickel plating for the contacts. The printed circuit board is made of FR4 with a thickness of 1.2 mm. The plug cycles are rated at a minimum of 750, ensuring high mechanical durability and long service life.

Compatibility and Accessories

The adapter is compatible with all devices supporting an RJ45 connection, including PCs, printers, network switches, and routers. Use is limited to CAT 5e networks, with shielding ensuring secure data transmission in environments with electromagnetic interference.

Installation and Mounting

Installation is performed by simply inserting the RJ45 plug into a network port, with the two RJ45 sockets connected to the end devices. The strain relief boot and latch lock protection ensure a secure and stable connection. The operating temperature of the adapter ranges from -40 °C to +80 °C, allowing use in a wide range of environments, including industrial applications.

Operational Advantages

Using the DIGITUS DN-93904 enables simple and cost-efficient branching of network connections without requiring additional network devices such as switches or hubs. The shielding ensures reliable data transmission, and the robust construction with high plug cycles guarantees long service life. The compact design with a cable length of 0.19 m makes the adapter ideal for use in confined spaces or during installation in existing network infrastructures.
This is an offer of:

Lieske Elektronik e.K.

Reutener Str. 10
79279 Vörstetten

https://industry-electronics.com
Tel. 07666/88499-0
Fax. 07666/88499-111

Diesen Artikel finden Sie unter:
industry-electronics.com/artikel/1253139
qrcode für DIGITUS DN-93904 Patch Cable Adapter Cat5e 2xRJ45-1xRJ45