| General |
| Number of ports | 25 Port |
| Connector type | RJ45 - |
| Plug type | 8P4C - |
| Cable category | Cat 3 - |
| Degree of protection | unshielded - |
| Height | 1 HE |
| Rack format | 19" - |
| Housing thickness | 1,5 mm |
| Colour | Grey - |
| Colour code | RAL 7035 - |
The DIGITUS DN-91325-1 is a
Patch Panel for ISDN applications, designed as a
25-Port module with
RJ45 connectors in
8P4C format. It serves for structured connection of ISDN end devices and lines in network infrastructures, particularly in environments where a fixed, cable-based connection is required. The device is
unshielded and designed for mounting in standard 48,3 cm ( 19 inch ) racks. The form factor corresponds to
1HE (1 Height Unit), enabling compact placement in server or network enclosures. The housing colour is
grey, specified as RAL 7035, providing a neutral, professional appearance.
Applications
This Patch Panel is used in IT and telecommunications installations where structured and clear cabling of ISDN lines is necessary. It is suitable for office and corporate networks where ISDN connections are used for telephony or data transmission. Its use in 48,3 cm ( 19 inch ) racks allows integrated integration into existing network architectures. The robust construction from
1.5 mm galvanised cold-rolled steel ensures mechanical stability and long service life, even under industrial conditions.
Functions and Equipment in Detail
The panel features 25 connection points with
RJ45 connectors, configured as
8P4C – meaning eight contact positions, of which only four contacts are occupied. This configuration is typical for ISDN applications, where signals are transmitted via the four inner contacts. The connectors are
unshielded, meaning no additional electromagnetic shielding is present. The panel is designed for mounting in 48,3 cm ( 19 inch ) racks and corresponds to a height of
1HE. Dimensions are 482 mm (width) × 44 mm (depth) × 109 mm (height), representing a compact installation form.
Technology Explained Simply
The use of
Cat 3 cables and connectors is sufficient for ISDN connections, as this technology requires a maximum data rate of 64 kbit/s per B channel, which is within the performance requirements of Cat 3. The
8P4C connector is specifically developed for ISDN connections, with the four inner contacts transmitting signal lines (T- and R-lines). The
unshielded design is sufficient for indoor use, where electromagnetic interference is low. The housing made of
galvanised cold-rolled steel provides mechanical strength and corrosion protection, increasing the device’s lifespan.
Compatibility and Accessories
The Patch Panel is compatible with standard ISDN cabling and can be operated with Cat 3 or higher-grade cables, provided the requirements of ISDN technology are met. It is designed for mounting in 48,3 cm ( 19 inch ) racks and can be combined with other 1HE modules. The use of
RJ45 connectors enables connection to standard ISDN end devices.
Mounting and Installation
Mounting is done in a 48,3 cm ( 19 inch ) rack using integrated mounting flanges. The installation height is 1HE, allowing easy placement in existing enclosures. Dimensions of 482 mm width, 44 mm depth, and 109 mm height are designed for standard rack installations. Cabling is done via the 25 RJ45 connectors, which are designed for direct connection to ISDN lines.
Operational Advantages
Structured cabling enables clear overview of ISDN connections, simplifying maintenance and fault diagnosis. The robust construction from steel sheet ensures long service life and mechanical stability. The ability to install in 48,3 cm ( 19 inch ) racks enables integrated network design. The use of Cat 3 technology is sufficient for ISDN applications and offers a cost-efficient solution for cabling ISDN lines.