DIGITUS Gigabit Multimode/Singlemode Media Converter SFP, Quick Start Guide, Power Supply
Diagnostic LEDs
External power supply
The DIGITUS DN-82133 is a Gigabit media converter for conversion between multimode and singlemode fiber optic. It enables migration of existing networks to fiber optic technology without replacing the entire copper cabling. The device supports distances of several kilometers, depending on the fiber type and wavelength, and is designed for indoor use. The SFP slots allow flexible use of various fiber optic transceivers, enabling the converter to adapt to different network requirements.
Applications
This converter is suitable for networks requiring fiber optic extension of range, for example in companies, buildings, or campus networks, where multimode fibers are installed indoors but long-distance connections require singlemode fiber. It is commonly used to connect existing multimode infrastructure with singlemode links, such as connecting server rooms over long distances or integrating outdoor connections.
Features and Specifications in Detail
The DN-82133 features two 100/1000Base-X SFP slots designed for installing SFP transceivers. Data transmission occurs at a data rate of 155 Mbit/s to 1.25 Gbit/s, with the exact speed depending on the transceiver used. The diagnostic LEDs indicate connection status and activity, simplifying troubleshooting and maintenance. The device comes with an external power supply providing an operating voltage of 5 V DC.
Technology Explained Simply
The converter converts signals between different fiber optic types: multimode fibers (e.g., 50/125 µm, 62.5/125 µm, 100/140 µm) are connected at one end, while a singlemode fiber (e.g., 8.3/125 µm, 8.7/125 µm, 9/125 µm, 10/125 µm) can be connected at the other end. Supported wavelengths include 850 nm and 1310 nm for multimode, and 1310 nm and 1550 nm for singlemode. These wavelengths are crucial for range and signal quality. The operating temperature ranges from −10 °C to 55 °C, suitable for typical indoor environments. The power consumption is 3.5 W, indicating efficient energy use.
Compatibility and Accessories
The converter is compatible with SFP transceivers supporting the mentioned fiber types and wavelengths. Using SFP modules allows flexible adaptation to various network requirements. No specific accessories are mentioned in the sources, so the delivery includes only the device, the quick start guide, and the power supply.
Installation and Mounting
The device is designed as a standalone converter and requires no special mounting. It is simply placed at an appropriate location in the network, with SFP transceivers inserted into the slots. Installation is done via fiber optic cables connected to the fiber endpoints. The intuitive operation and clear LED indicators simplify setup.
Operational Advantages
The DN-82133 enables cost-efficient migration to fiber optic technology without replacing existing copper cabling. The use of SFP modules offers flexibility in selecting fiber type and range. The diagnostic LEDs support maintenance and fault diagnosis. The device is compact (dimensions: 95 × 70 × 26 mm) and lightweight (300 g), allowing flexible placement. The operating temperature range of −10 to 55 °C makes it suitable for typical indoor conditions.
The delivery includes the DIGITUS Gigabit Multimode/Singlemode Media Converter SFP, a quick start guide, and the power supply. Batteries or other accessories are not included.