| General |
| Conversion type | 10/100/1000Base-TX to 1000Base-SX |
| Fibre type | Multi mode |
| Wavelength | 850 nm |
| Transmission range | 0,5 km |
| Copper connection | RJ45 |
| Fibre optic connection | ST Duplex |
| Application range | Indoor |
| Scope of delivery | Media converter, power supply, quick start guide |
The DIGITUS media converter DN-82110-1 is a Gigabit network device for converting copper signals into fibre optic signals. It is used for migrating existing copper cabling to fibre optic, enabling data transmission over longer distances without replacing the entire network infrastructure. The device converts signals in the 10/100/1000Base-TX standard to the fibre optic standard 1000Base-SX, enabling data transmission at Gigabit speed over a distance of up to 0.5 km. The conversion is performed via an RJ45 connector for the copper cable and an ST duplex connector for the fibre optic connection.
Applications
The converter is intended for indoor use and is particularly suitable for networks that need to be extended over long distances, for example in office buildings, industrial facilities or campus networks. It enables the connection of network segments separated by large distances without requiring a complete reconfiguration of the copper cabling. The use of multimode fibre optic with a wavelength of 850 nm ensures efficient signal transmission over the specified range.
Functions and Features in Detail
The converter features automatic cable detection, allowing adaptation to various cable types (e.g. crossover or straight-through). This reduces installation complexity and minimises error susceptibility. Signal quality is ensured by high reliability and stable transmission at Gigabit speed. The operation is intuitive, enabling quick and easy installation.
Technology Explained Simply
The converter converts electrical signals from a copper cable (RJ45) into optical signals for a multimode fibre optic cable (ST connector). The wavelength of 850 nm is typical for multimode fibres and enables efficient data transmission over the specified range. The use of 1000Base-SX on the fibre optic side ensures a data rate of 1 Gbit/s. The conversion is bidirectional, allowing data transmission in both directions.
Compatibility and Accessories
The converter is compatible with networks supporting the 10/100/1000Base-TX standard and connects them to fibre optic infrastructures in the 1000Base-SX standard. The use of multimode fibre optic with ST connectors requires corresponding cables and connectors. The device is supplied with a power supply unit to ensure power supply.
Mounting and Installation
Installation is performed by connecting the RJ45 port to a network device (e.g. switch or router) and the ST connector to a multimode fibre optic cable. The automatic cable detection ensures that no manual configuration of cable direction is required. Physical mounting is done in a standard network enclosure or on a desk, as the device does not require special mounting hardware.
Operational Advantages
Operation of the converter is low-maintenance and reliable. High reliability and stable data transmission at Gigabit speed ensure continuous network availability. The use of fibre optic enables higher bandwidth and lower signal interference compared to copper cables, especially over long distances. The combination of copper and fibre optic technology offers flexibility in network design.
Scope of Delivery
The device is supplied with a power supply unit and a quick start guide. The guide supports installation and configuration of the converter.