| General |
| Conversion | 10/100Base-TX to 100Base-FX |
| Connections | 1x RJ45, 1x SC Duplex |
| Wavelength | 1310 nm |
| Transmission range | 2 km |
| Fibre type | Multi mode |
| Application area | Indoor |
| Colour | Black |
| Scope of delivery | Media converter, quick start guide, power supply |
| Standards | IEEE 802.3, IEEE 802.3u |
| Function | Link Fault Pass Through |
| ear category | 5 |
The DIGITUS media converter DN-82020-1 is a network device for converting copper signals into fiber optic signals. It enables the connection of 10/100Base-TX networks via copper cables with 100Base-FX fiber optic lines, making transmission distances up to 2 km feasible. The device is designed for indoor use and serves to migrate existing copper infrastructures to fiber optic, without requiring the entire cabling to be replaced. The conversion is performed via an RJ45 connector for the copper cable and an SC duplex connector for the fiber optic, with a wavelength of 1310 nm. The technology is based on multimode fiber optic, suitable for short to medium distances.
Applications
The media converter is suitable for networks requiring extended reach beyond copper cables, for example in buildings, factories, or office complexes distributed across multiple floors or buildings. It is frequently used in local area networks (LAN) to ensure data transmission over longer distances without impairing network performance. The use of fiber optic offers advantages such as lower signal loss and higher resistance to electromagnetic interference.
Functions and Equipment in Detail
The device features a Link Fault Pass Through function, enabling quick detection of network disruptions. If a connection is interrupted, this is relayed to the connected network devices, allowing the administrator to precisely locate the fault. Operation is intuitive, ensuring quick and easy installation. The device is compact, with a width of 70 mm, depth of 95 mm, and height of 26 mm, making it suitable even for limited mounting spaces. The color is black, enabling unobtrusive integration into existing infrastructures.
Technology Explained Simply
The converter transforms electrical signals transmitted via an RJ45 cable into optical signals sent via a fiber optic cable with SC duplex connector. The transmission rate reaches up to 100 Mbit/s in the Fast Ethernet standard (100Base-FX). The wavelength of 1310 nm is typical for multimode fiber optic and enables stable transmission up to the maximum range of 2 km. The use of multimode fiber optic is particularly suitable for indoor environments, as it has a larger core diameter and is therefore easier to connect than singlemode fiber.
Compatibility and Accessories
The media converter is compatible with IEEE 802.3 standards for Ethernet and IEEE 802.3u for Fast Ethernet. It can be integrated into existing networks supporting these standards. As an accessory, a media converter chassis with 14 slots and 2HE height is available, which can accommodate multiple converters to enable centralized management.
Mounting and Installation
Installation requires no special tools. The device can be mounted on a wall or in a rack, with its compact design allowing flexible placement. The connectors are clearly labeled: RJ45 for the copper cable and SC duplex for the fiber optic. Power supply is provided via the included power adapter, which connects directly to the device. The quick start guide included in the delivery supports setup.
Advantages in Operation
Operation of the converter is low-maintenance and reliable. Fiber optic transmission offers high data integrity and is resistant to electromagnetic interference. The Link Fault Pass Through function improves network monitoring, as disruptions can be quickly identified. The combination of copper and fiber optic connections enables flexible network design, allowing existing copper lines to remain in place while extending reach via fiber optic. The device is designed for indoor use and meets the requirements of ear category 5 (small appliances) according to ElektroG.
The delivery includes the DIGITUS media converter, a quick start guide, and a power adapter. The guide supports setup and configuration of the device. The power adapter is intended for powering the converter and connects directly to the device.