Further information for DIGITUS DN-19 PLINTH-8/10-N1 Rack Mount 1HE gray
General
Material
Steel
Colour
Grey
RAL-number
7035
Suitable for enclosure building width
800 mm
Suitable for enclosure building depth
1000 mm
Cable gland
With brush bar
Side shields
Removable
Delivery condition
unmounted
Steel sheet thickness
1,5 mm
Suitability for outdoor installation
Suitability for ventilation
Suitability for cable management
The DIGITUS plinth DN-19 PLINTH-8/10-N1 is an accessory for 19-inch network and server racks of the Unique and Dynamic Basic series. It increases the floor clearance by 100 mm and enables better positioning of the racks, especially in rooms with uneven flooring or when using floor coverings that require a minimum height. The plinth is made of sheet steel and has dimensions of 100 mm height, 800 mm width, and 1000 mm depth. The colour is grey, corresponding to RAL 7035. The construction is designed for racks with a width of 800 mm and a depth of 1000 mm. The product is delivered unassembled, which simplifies logistics and transportation.
Applications
The plinth is primarily mounted under 19-inch network racks of the Unique and Dynamic Basic series to increase their floor clearance. This is particularly useful in data centres, server rooms, or IT infrastructures where sufficient air circulation or avoidance of floor contact is required. The height increase of 100 mm can be extended to a total of 200 mm if two plinths are stacked. The interior space of the plinth can be used for storing cable excesses, supporting cable management in the rack area.
Functions and Equipment in Detail
The plinth features a rear panel with cable entry and a brush strip, enabling orderly and dust-reducing cable routing. The removable side panels facilitate assembly and access to the interior. The cable entry is specifically designed for cable management, ensuring that cabling under the rack remains structured and clear.
Technology Explained Simply
The plinth is made of 1.5 mm thick sheet steel, providing sufficient stability to support the rack load. The dimensions of 100x800x1000 mm fit exactly to the standard dimensions of the corresponding racks. The brush strip at the rear prevents dust and dirt from entering the rack area, while allowing cables to pass through easily. Installation takes place underneath the rack, and the unassembled delivery allows for flexible adaptation to the specific installation.
Compatibility and Accessories
The plinth is specifically designed for the 483 mm (19“) racks of the Unique and Dynamic Basic series from DIGITUS Professional. It is compatible with models such as Unique, Unique Light, and Unique Server-N. Use is limited to these rack types, as the dimensions and mounting points are tailored to these series.
Installation and Mounting
Mounting is performed underneath the network or server rack. The unassembled delivery requires on-site assembly, with designated mounting points and fastening elements simplifying the installation. The removable side panels and the rear cable entry with brush strip support a clean and structured installation. The mounting is designed for professionals in the IT and electrical sectors who are familiar with handling 19-inch technology.
Operational Advantages
Increasing the floor clearance by 100 mm (or 200 mm when stacked) improves rack positioning and enables better air circulation, especially when using floor coverings. The interior space of the plinth provides additional storage for cable excesses, supporting cable management in the rack area. The brush strip at the rear reduces dust and dirt ingress, enhancing the long-term stability of the installation. The unassembled delivery optimizes logistics and reduces transportation effort.